Hydraulic Motor Stator for Replace Poclain ms35 motor
Port Orientation - Shaft End: | 76.0 LB |
Port Size: | Flange Mount |
Minor Diameter [Min: | Right Hand (CW) |
Port Orientation - Cover End: | 3525VQ30A21-11CC20 |
Cover End RPM [Max: | 3 |
Mounting Flange: | Flange |
Minor Diameter: | N/A |
Pilot Type: | Standard Pilot |
PDF |
|
Product Details
Port Orientation - Shaft End | 76.0 LB |
Port Size | Flange Mount |
Minor Diameter [Min | Right Hand (CW) |
Port Orientation - Cover End | 3525VQ30A21-11CC20 |
Cover End RPM [Max | 3 |
Mounting Flange | Flange |
Minor Diameter | N/A |
Pilot Type | Standard Pilot |
Port Type | 1.25 in |
Relief Valve Setting | 14 Tooth Splined |
Manufacturer Part No. | 3525VQ |
Shaft Type | 1 15/16 in |
Shaft Length | Buna-N |
Shaft Seal Type | 2500 |
Shaft End RPM [Max | 1.04 in |
Pump Series | SAE C, 2 Bolt |
Pressure Port Size, Shaft End | Single Shaft Seal |
Controlled Flow Rate | 12/24 |
Major Diameter [Max | 2500 |
GPM @ 1,800 rpm, Shaft End | 2500 |
Displacement Cover End (cu in/revolution) | N/A |
Spline Description | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | 1.248 in |
Shaft Key | 1.247 in |
Minor Diameter [Max | N/A |
Integral Valve Configuration | N/A |
Major Diameter [Min | N/A |
Cover End Pressure [Max | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End | 3525VQ30A21-11CC20 |
Shaft End Pressure [Max | 3000 |
Shaft Dia. | 3000 |
Rotation | 31.5 |
Mounting | 45 |
Shaft End Flow @ RPM | w/o Integral Valves |
Displacement Shaft End (cu in/revolution) | Outlet 45° CW from Inlet |
Max. RPM [Max | Outlet Inline w/Inlet |
Cover End Flow @ RPM | 1 in Flange |
Weight | 1 1/4 in Flange |
Seal Material | 4.12 |
Model No. | 5.96 |