101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
Major Diameter [Max: | 45.0 LB |
Port Size: | Flange Mount |
GPM @ 1,800 rpm, Shaft End: | Left Hand (CCW) |
Port Orientation - Cover End: | 2520VQ17A14-11CC20-LH |
Shaft Dia.: | 2.5 |
Controlled Flow Rate: | Flange |
Pump Series: | N/A |
Mounting Flange: | Standard Pilot |
PDF |
|
Product Details
Major Diameter [Max | 45.0 LB |
Port Size | Flange Mount |
GPM @ 1,800 rpm, Shaft End | Left Hand (CCW) |
Port Orientation - Cover End | 2520VQ17A14-11CC20-LH |
Shaft Dia. | 2.5 |
Controlled Flow Rate | Flange |
Pump Series | N/A |
Mounting Flange | Standard Pilot |
Port Type | 0.875 in |
GPM @ 1,800 rpm, Cover End | 13 Tooth Splined |
Shaft End Pressure [Max | 2520VQ |
Shaft Key | 1.375 in |
Minor Diameter [Max | Double |
Pressure Port Size, Shaft End | Buna-N |
Spline Description | 2500 |
Cover End Flow @ RPM | 0.715 in |
Integral Valve Configuration | SAE B, 2 Bolt |
Weight | Single Shaft Seal |
Model No. | 16/32 |
Shaft Length | 2700 |
Relief Valve Setting | 2500 |
Seal Material | N/A |
Shaft Seal Type | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Manufacturer Part No. | 0.873 in |
Rotation | 0.872 in |
Mounting | N/A |
Shaft End RPM [Max | N/A |
Cover End Pressure [Max | N/A |
Displacement Shaft End (cu in/revolution) | 3.4 |
Pressure Port Size, Cover End | 2520VQ17A14-11CC20-LH |
Major Diameter [Min | 2000 |
Pilot Type | 3000 |
Max. RPM [Max | 21 |
Displacement Cover End (cu in/revolution) | 25.5 |
Shaft End Flow @ RPM | w/o Integral Valves |
Minor Diameter | Outlet 45° CW from Inlet |
Port Orientation - Shaft End | Outlet Inline w/Inlet |
Minor Diameter [Min | 3/4 in Flange |
Cover End RPM [Max | 1 in Flange |
Shaft Type | 2.8 |