Excavator Diesel Engine 6SD1 EX300-2/3 Water Pump 1-13610944-0 replace isuzu
Shaft Seal Type: | 76.0 LB |
Port Size: | Flange Mount |
Displacement Shaft End (cu in/revolution): | Right Hand (CW) |
Relief Valve Setting: | 3525VQ30A12-1CC20 |
Displacement Cover End (cu in/revolution): | 3 |
Seal Material: | Flange |
Port Orientation - Shaft End: | 5/16 in |
GPM @ 1,800 rpm, Cover End: | Standard Pilot |
PDF |
|
Product Details
Shaft Seal Type | 76.0 LB |
Port Size | Flange Mount |
Displacement Shaft End (cu in/revolution) | Right Hand (CW) |
Relief Valve Setting | 3525VQ30A12-1CC20 |
Displacement Cover End (cu in/revolution) | 3 |
Seal Material | Flange |
Port Orientation - Shaft End | 5/16 in |
GPM @ 1,800 rpm, Cover End | Standard Pilot |
Port Orientation - Cover End | 1.25 in |
Shaft Key | Straight w/ Key |
Port Type | 3525VQ |
Weight | 2 1/2 in |
Shaft End Flow @ RPM | Buna-N |
Pressure Port Size, Cover End | 2500 |
Max. RPM [Max | N/A |
Shaft Dia. | SAE C, 2 Bolt |
Pilot Type | Single Shaft Seal |
Shaft End Pressure [Max | N/A |
Major Diameter [Max | 2500 |
Minor Diameter [Min | 2500 |
Minor Diameter | N/A |
GPM @ 1,800 rpm, Shaft End | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Cover End Flow @ RPM | N/A |
Spline Description | N/A |
Major Diameter [Min | N/A |
Pressure Port Size, Shaft End | N/A |
Shaft End RPM [Max | N/A |
Shaft Type | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Model No. | 3525VQ30A12-1CC20 |
Controlled Flow Rate | 3000 |
Minor Diameter [Max | 3000 |
Pump Series | 18 |
Mounting Flange | 45 |
Shaft Length | w/o Integral Valves |
Manufacturer Part No. | Outlet 45° CW from Inlet |
Mounting | Outlet Inline w/Inlet |
Rotation | 1 in Flange |
Cover End Pressure [Max | 1 1/4 in Flange |
Integral Valve Configuration | 2.45 |
Cover End RPM [Max | 5.96 |