PC60-7 Hydraulic Excavator 4D95 Engine Lubricating Oil Pump 6204-53-1100
| Seal Material: | 15.0 LB |
| Cover End Flow @ RPM: | Flange Mount |
| Controlled Flow Rate: | Right Hand (CW) |
| Minor Diameter [Min: | 1 |
| Relief Valve Setting: | NPT |
| Displacement Shaft End (cu in/revolution): | N/A |
| Manufacturer Part No.: | 20 |
| Major Diameter [Max: | 1 gpm @ 1200 rpm |
| PDF |
|
Product Details
| Seal Material | 15.0 LB |
| Cover End Flow @ RPM | Flange Mount |
| Controlled Flow Rate | Right Hand (CW) |
| Minor Diameter [Min | 1 |
| Relief Valve Setting | NPT |
| Displacement Shaft End (cu in/revolution) | N/A |
| Manufacturer Part No. | 20 |
| Major Diameter [Max | 1 gpm @ 1200 rpm |
| Max. RPM [Max | 0.73 in |
| Pilot Type | 11 Tooth Splined |
| Pressure Port Size, Shaft End | 2 / 1800 |
| Port Orientation - Cover End | V10 |
| Model No. | 1.25 in |
| Port Type | 1/2 in NPT |
| Spline Description | Buna-N |
| Pump Series | 4800 |
| Shaft End RPM [Max | 2500 psi |
| Shaft End Pressure [Max | 1 1/2 |
| Mounting | P |
| Integral Valve Configuration | SAE A, 2 Bolt |
| Minor Diameter | P |
| GPM @ 1,800 rpm, Shaft End | 1 |
| Shaft Key | Opposite Inlet Port |
| Cover End Pressure [Max | 0.2 |
| Shaft Length | w/o Integral Valves |
| Displacement Cover End (cu in/revolution) | 38A |
Low Speed BMP100 Hydraulic Orbit Motor For Replace Sauer
Hydraulic Motor Stator for Replace Poclain ms35 motor
Eaton Orbit Hydraulic Motor 101-1035-009/101-1035 BMPH100 Hydromotor
101-1051-009/101-1051 BMPH100 Hydraulic Auger Motor For Drilling Rig
BMSY/OMSY High Torque Replacement Charlynn Hydraulic Orbit Motor
Hydstar selling CBN-F300 CBN-E300 cbn e314 Hydraulic Gear Pump