6Y3864 Gear transmission Pump Loader Hydraulic Pump for Replace Caterpillar
Port Size: | 30.0 LB |
Displacement Shaft End (cu in/revolution): | Flange Mount |
Spline Description: | Left Hand (CCW) |
Cover End RPM [Max: | V2010-1F8S3S-1CC12-LH |
Rotation: | 1 1/2 |
Pressure Port Size, Shaft End: | Flange |
Shaft End RPM [Max: | 3/16 in |
Major Diameter [Min: | N/A |
PDF |
|
Product Details
Port Size | 30.0 LB |
Displacement Shaft End (cu in/revolution) | Flange Mount |
Spline Description | Left Hand (CCW) |
Cover End RPM [Max | V2010-1F8S3S-1CC12-LH |
Rotation | 1 1/2 |
Pressure Port Size, Shaft End | Flange |
Shaft End RPM [Max | 3/16 in |
Major Diameter [Min | N/A |
Shaft Seal Type | 0.875 in |
Shaft Length | Straight w/ Key |
Port Type | V2010 |
Model No. | 2.3125 in |
Shaft Type | Buna-N |
Mounting | 2800 |
Shaft Dia. | N/A |
Major Diameter [Max | SAE B, 2 Bolt |
Controlled Flow Rate | Single Shaft Seal |
Shaft End Pressure [Max | N/A |
Pressure Port Size, Cover End | 3000 |
Cover End Flow @ RPM | 2800 |
Port Orientation - Cover End | N/A |
Seal Material | 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
Max. RPM [Max | N/A |
GPM @ 1,800 rpm, Shaft End | N/A |
Weight | N/A |
Mounting Flange | N/A |
Shaft End Flow @ RPM | N/A |
Displacement Cover End (cu in/revolution) | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Minor Diameter [Min | V2010-1F8S3S-1CC12-LH |
GPM @ 1,800 rpm, Cover End | 2500 |
Port Orientation - Shaft End | 2500 |
Integral Valve Configuration | 4.5 |
Pilot Type | 12 |
Minor Diameter [Max | N/A |
Manufacturer Part No. | Outlet 45° CW from Inlet |
Minor Diameter | Outlet Inline w/Inlet |
Shaft Key | 1/2 in SAE O-Ring |
Cover End Pressure [Max | 3/4 in SAE O-Ring |
Relief Valve Setting | 0.6 |
Pump Series | 1.62 |