3N2078 New Aftermarket Cat Excavator Fuel Pump
Weight: | 45.0 LB |
Port Size: | Flange Mount |
Minor Diameter: | Right Hand (CW) |
Shaft Type: | 2520VQ21A5-1DD20 |
Shaft Key: | 2.5 |
Minor Diameter [Max: | Flange |
Shaft Length: | 3/16 in |
Displacement Shaft End (cu in/revolution): | 4.1 |
PDF |
|
Product Details
Weight | 45.0 LB |
Port Size | Flange Mount |
Minor Diameter | Right Hand (CW) |
Shaft Type | 2520VQ21A5-1DD20 |
Shaft Key | 2.5 |
Minor Diameter [Max | Flange |
Shaft Length | 3/16 in |
Displacement Shaft End (cu in/revolution) | 4.1 |
GPM @ 1,800 rpm, Shaft End | 0.875 in |
Port Orientation - Shaft End | Straight w/ Key |
Model No. | 2520VQ |
Port Type | 1 15/16 in |
Shaft Dia. | Double |
Port Orientation - Cover End | Buna-N |
Rotation | 2500 |
Shaft End RPM [Max | N/A |
Seal Material | SAE B, 2 Bolt |
Shaft End Pressure [Max | Single Shaft Seal |
Cover End RPM [Max | N/A |
GPM @ 1,800 rpm, Cover End | 2700 |
Controlled Flow Rate | 2500 |
Cover End Flow @ RPM | N/A |
Shaft End Flow @ RPM | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Integral Valve Configuration | N/A |
Pressure Port Size, Shaft End | N/A |
Pump Series | N/A |
Mounting Flange | N/A |
Minor Diameter [Min | N/A |
Pilot Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Major Diameter [Max | 2520VQ21A5-1DD20 |
Spline Description | 3000 |
Max. RPM [Max | 3000 |
Cover End Pressure [Max | 7.5 |
Shaft Seal Type | 31.5 |
Major Diameter [Min | w/o Integral Valves |
Relief Valve Setting | Outlet 135° CW from Inlet |
Mounting | Outlet 90° CW from Inlet |
Manufacturer Part No. | 3/4 in Flange |
Pressure Port Size, Cover End | 1 in Flange |
Displacement Cover End (cu in/revolution) | 1.1 |