| BMP315/OBP315 High Speed Orbit Hydraulic Motor For Drilling Machine | Spline Description:30.0 LB; Minor Diameter [Min:Flange Mount; Weight:Right Hand (CW); Shaft Dia.:V2010-1F9S3S-11DD12; Pump Series:1 1/2; Pilot Type:Flange; Shaft Length:N/A; Pressure Port Size, Cover End:N/A; Manufacturer Part No.:0.875 in; Shaft Seal Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| China Eaton Char-lynn BMT/OMT 400CC Orbit Hydraulic Motor for Concrete Mixer | Rotation:30.0 LB; Minor Diameter [Min:Flange Mount; Cover End RPM [Max:Right Hand (CW); Max. RPM [Max:V2010-1F9S3S-11DD12; Shaft Dia.:1 1/2; Shaft Type:Flange; Spline Description:N/A; Shaft Key:N/A; Pressure Port Size, Shaft End:0.875 in; Port Orientation - Shaft End:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| Replacement Shimadzu SGP1 Forklift Parts Hydraulic Pump | Port Size:30.0 LB; Port Orientation - Shaft End:Flange Mount; Displacement Shaft End (cu in/revolution):Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2010-1F9S3S-11DD12; Port Orientation - Cover End:1 1/2; Cover End Pressure [Max:Flange; Pressure Port Size, Shaft End:N/A; Shaft Type:N/A; Relief Valve Setting:0.875 in; Port Type:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| BK10 Static Wet Hydraulic Brake for Elevating Work Platforms | Model No.:30.0 LB; Port Type:Flange Mount; Cover End Flow @ RPM:Right Hand (CW); Rotation:V2010-1F9S3S-11DD12; Major Diameter [Max:1 1/2; GPM @ 1,800 rpm, Shaft End:Flange; Weight:N/A; Shaft End Pressure [Max:N/A; Port Orientation - Cover End:0.875 in; Shaft End RPM [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| Replacement Poclain Hydraulic Motor Parts MS25 Cam Ring Stator | Shaft End Pressure [Max:30.0 LB; Cover End RPM [Max:Flange Mount; Shaft End Flow @ RPM:Right Hand (CW); Port Orientation - Cover End:V2010-1F9S3S-11DD12; Cover End Pressure [Max:1 1/2; GPM @ 1,800 rpm, Cover End:Flange; Port Type:N/A; Pressure Port Size, Cover End:N/A; Minor Diameter:0.875 in; Model No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| CBTL CBT Series Hydraulic Double Gear Pump | GPM @ 1,800 rpm, Shaft End:30.0 LB; Port Type:Flange Mount; Shaft End RPM [Max:Right Hand (CW); Shaft End Flow @ RPM:V2010-1F9S3S-11DD12; Minor Diameter:1 1/2; Seal Material:Flange; Shaft Key:N/A; Port Orientation - Cover End:N/A; Relief Valve Setting:0.875 in; Shaft End Pressure [Max:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| BMP250 Motor Drive shaft Hydraulic Orbit Motor | Shaft Type:30.0 LB; Minor Diameter:Flange Mount; Minor Diameter [Min:Right Hand (CW); Pressure Port Size, Shaft End:V2010-1F9S3S-11DD12; Shaft End Pressure [Max:1 1/2; Displacement Shaft End (cu in/revolution):Flange; Major Diameter [Min:N/A; Port Size:N/A; GPM @ 1,800 rpm, Cover End:0.875 in; Manufacturer Part No.:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| 101-1086-009/101-1086 BMPH250 Vibrating Motor Hydraulic | Shaft Seal Type:30.0 LB; Integral Valve Configuration:Flange Mount; Max. RPM [Max:Right Hand (CW); Cover End Flow @ RPM:V2010-1F9S3S-11DD12; Cover End RPM [Max:1 1/2; Seal Material:Flange; Minor Diameter:N/A; Manufacturer Part No.:N/A; Port Orientation - Shaft End:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| CBT-F410;CBT-F412.5;CBT-F416;CBT-F420;CBT-F425;CBT-F432 Mini CBT Gear Pump | Spline Description:30.0 LB; GPM @ 1,800 rpm, Cover End:Flange Mount; Port Type:Right Hand (CW); Displacement Shaft End (cu in/revolution):V2010-1F9S3S-11DD12; Minor Diameter [Min:1 1/2; Shaft End RPM [Max:Flange; Relief Valve Setting:N/A; Minor Diameter [Max:N/A; Major Diameter [Max:0.875 in; Seal Material:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| GHP1;GHP1A;GHP1A2 High Pressure Mini Hydraulic Gear Pump | Integral Valve Configuration:30.0 LB; Spline Description:Flange Mount; Rotation:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:V2010-1F9S3S-11DD12; Displacement Shaft End (cu in/revolution):1 1/2; Port Orientation - Cover End:Flange; Major Diameter [Max:N/A; Port Orientation - Shaft End:N/A; Pump Series:0.875 in; Minor Diameter:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| Excavator Hydraulic Pump Repair Kit GM35 GM03 GM05 GM06 GM08 GM10 GM17 GM18 GM23 GM24 for Travel Motor | Major Diameter [Min:30.0 LB; Shaft End Flow @ RPM:Flange Mount; Shaft Dia.:Right Hand (CW); Port Type:V2010-1F9S3S-11DD12; Shaft Length:1 1/2; Mounting:Flange; GPM @ 1,800 rpm, Cover End:N/A; Port Size:N/A; Shaft End RPM [Max:0.875 in; Minor Diameter [Min:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| SQP21/SQP31/SQP32/SQP41/SQP42/43 Hydraulic Vane Type SQP Series Double pump | Minor Diameter [Min:30.0 LB; Weight:Flange Mount; Model No.:Right Hand (CW); Pressure Port Size, Cover End:V2010-1F9S3S-11DD12; Shaft Key:1 1/2; Seal Material:Flange; Displacement Shaft End (cu in/revolution):N/A; Displacement Cover End (cu in/revolution):N/A; Mounting:0.875 in; Cover End Flow @ RPM:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| for Daikin Hydraulic Piston Pump Spare Part V15 V18 V23 V38 V50 V70 | Shaft End Flow @ RPM:30.0 LB; Shaft Length:Flange Mount; Weight:Right Hand (CW); Pump Series:V2010-1F9S3S-11DD12; Shaft Dia.:1 1/2; Shaft Type:Flange; Major Diameter [Min:N/A; Pressure Port Size, Cover End:N/A; Shaft End Pressure [Max:0.875 in; Port Size:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
| CBN-E310;CBN-F310 CBN Hydraulic Gear Pump for Agriculture Machinery | Shaft Seal Type:30.0 LB; Rotation:Flange Mount; Shaft Length:Right Hand (CW); Integral Valve Configuration:V2010-1F9S3S-11DD12; Pressure Port Size, Cover End:1 1/2; Port Size:Flange; Pilot Type:N/A; GPM @ 1,800 rpm, Cover End:N/A; Shaft Dia.:0.875 in; Controlled Flow Rate:13 Tooth Splined; Pump Series:V2010; Shaft Length:1 5/16 in; Seal Material:Buna-N; Max. RPM [Max:2800; Minor Diameter:0.728 in; Mounting Flange:SAE B, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:16/32; Cover End RPM [Max:3000; Shaft End RPM [Max:2800; Controlled Flow Rate:N/A; Cover End Flow @ RPM:3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm; Major Diameter [Max:0.873 in; Major Diameter [Min:0.872 in; Minor Diameter [Max:0.7335 in; Minor Diameter [Min:0.7225 in; Relief Valve Setting:N/A; Shaft End Flow @ RPM:9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm; Manufacturer Part No.:V2010-1F9S3S-11DD12; Cover End Pressure [Max:2500; Shaft End Pressure [Max:2500; GPM @ 1,800 rpm, Cover End:4.5; GPM @ 1,800 rpm, Shaft End:13.5; Integral Valve Configuration:N/A; Port Orientation - Cover End:Outlet 135° CW from Inlet; Port Orientation - Shaft End:Outlet 90° CW from Inlet; Pressure Port Size, Cover End:1/2 in SAE O-Ring; Pressure Port Size, Shaft End:3/4 in SAE O-Ring; Displacement Cover End (cu in/revolution):0.6; Displacement Shaft End (cu in/revolution):1.81; |
Vane Pumps | Oil Hydraulics | Daikin Industries, Ltd
DEV Series Medium-pressure Cartridge Type Vane Pump. DEV. Features. The intra-vane type structure that supports pressure up to 20.6 MPa realizes
Vane Pump - Becker Pumps
A rotary vane pump works using positive displacement. It is made up of a series of vanes mounted within a rotor. This provides circulation within the main cavity,
Vane Pumps | Parker NA
Parker's comprehensive line includes gear pumps, piston and vane pumps, gold cup hydrostatic transmission pumps and flow dividers and intensifiers
Vane Pumps - Pump School
As the rotor rotates (yellow arrow) and fluid enters the pump, centrifugal force, hydraulic pressure, and/or pushrods push the vanes to the walls of the housing. The
Rotary vane pump - Wikipedia
A rotary vane pump is a positive-displacement pump that consists of vanes mounted to a rotor that rotates inside a cavity. In some cases these vanes can have variable length and/or be tensioned to maintain contact with the walls as the pump rotates. It was invented by Charles C
Vane pump | mechanics | Britannica
A sliding vane pump is illustrated in Figure 3. The rotor is mounted off-centre. Rectangular vanes are positioned at regular intervals around the curved surface of
A4VG28 Gear Type Charge Pilot Pump for Rexroth PIston Pump Video