GHP1;GHP1A;GHP1A2 High Pressure Mini Hydraulic Gear Pump
Shaft Type: | 30.0 LB |
Shaft Length: | Flange Mount |
Mounting Flange: | Right Hand (CW) |
Rotation: | V2010-1F11S4S-11AA12 |
Port Size: | 1 1/2 |
Displacement Cover End (cu in/revolution): | Flange |
Shaft End RPM [Max: | N/A |
Cover End RPM [Max: | N/A |
PDF |
|
Product Details
Shaft Type | 30.0 LB |
Shaft Length | Flange Mount |
Mounting Flange | Right Hand (CW) |
Rotation | V2010-1F11S4S-11AA12 |
Port Size | 1 1/2 |
Displacement Cover End (cu in/revolution) | Flange |
Shaft End RPM [Max | N/A |
Cover End RPM [Max | N/A |
Pilot Type | 0.875 in |
Major Diameter [Max | 13 Tooth Splined |
Minor Diameter [Max | V2010 |
Seal Material | 1 5/16 in |
Shaft End Flow @ RPM | Buna-N |
Port Type | 2500 |
Max. RPM [Max | 0.728 in |
Port Orientation - Cover End | SAE B, 2 Bolt |
Cover End Flow @ RPM | Single Shaft Seal |
Relief Valve Setting | 16/32 |
Model No. | 3000 |
Minor Diameter [Min | 2500 |
Shaft Seal Type | N/A |
Pump Series | 4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) | 0.873 in |
Port Orientation - Shaft End | 0.872 in |
Minor Diameter | 0.7335 in |
Major Diameter [Min | 0.7225 in |
Pressure Port Size, Cover End | N/A |
GPM @ 1,800 rpm, Shaft End | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Weight | V2010-1F11S4S-11AA12 |
Pressure Port Size, Shaft End | 2500 |
GPM @ 1,800 rpm, Cover End | 2500 |
Spline Description | 6 |
Shaft Key | 16.5 |
Shaft Dia. | N/A |
Controlled Flow Rate | Outlet 135° CCW from Inlet |
Manufacturer Part No. | Outlet Opposite Inlet |
Integral Valve Configuration | 1/2 in SAE O-Ring |
Shaft End Pressure [Max | 3/4 in SAE O-Ring |
Cover End Pressure [Max | 0.8 |
Mounting | 2.22 |