| CBT-F410;CBT-F412.5;CBT-F416;CBT-F420;CBT-F425;CBT-F432 Mini CBT Gear Pump | Controlled Flow Rate:15.0 LB; Cover End Flow @ RPM:Flange Mount; Pilot Type:Right Hand (CW); Shaft Key:SAE-16; Relief Valve Setting:SAE; Major Diameter [Max:3/16 in; Shaft Seal Type:20; Major Diameter [Min:2 gpm @ 1200 rpm; Pressure Port Size, Cover End:0.75 in; Cover End Pressure [Max:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| CBN-E310;CBN-F310 CBN Hydraulic Gear Pump for Agriculture Machinery | Cover End RPM [Max:15.0 LB; Port Orientation - Shaft End:Flange Mount; Max. RPM [Max:Right Hand (CW); Shaft Length:SAE-16; Pressure Port Size, Cover End:SAE; Shaft Type:3/16 in; Minor Diameter:20; Manufacturer Part No.:2 gpm @ 1200 rpm; Cover End Flow @ RPM:0.75 in; Mounting Flange:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| BK10 Static Wet Hydraulic Brake for Elevating Work Platforms | Major Diameter [Min:15.0 LB; Port Type:Flange Mount; Port Size:Right Hand (CW); Port Orientation - Cover End:SAE-16; Mounting Flange:SAE; Shaft End Flow @ RPM:3/16 in; Mounting:20; Pilot Type:2 gpm @ 1200 rpm; Major Diameter [Max:0.75 in; Shaft Dia.:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| Excavator Hydraulic Pump Repair Kit GM35 GM03 GM05 GM06 GM08 GM10 GM17 GM18 GM23 GM24 for Travel Motor | Shaft Length:15.0 LB; Controlled Flow Rate:Flange Mount; Max. RPM [Max:Right Hand (CW); Relief Valve Setting:SAE-16; Seal Material:SAE; Port Size:3/16 in; Model No.:20; Port Orientation - Cover End:2 gpm @ 1200 rpm; Weight:0.75 in; Mounting Flange:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| BMP250 Motor Drive shaft Hydraulic Orbit Motor | Shaft End RPM [Max:15.0 LB; Model No.:Flange Mount; Minor Diameter [Max:Right Hand (CW); Max. RPM [Max:SAE-16; Shaft Dia.:SAE; Shaft Seal Type:3/16 in; Integral Valve Configuration:20; Minor Diameter [Min:2 gpm @ 1200 rpm; Cover End Flow @ RPM:0.75 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| 101-1086-009/101-1086 BMPH250 Vibrating Motor Hydraulic | Displacement Cover End (cu in/revolution):15.0 LB; Shaft End RPM [Max:Flange Mount; Manufacturer Part No.:Right Hand (CW); Weight:SAE-16; Shaft Key:SAE; Major Diameter [Min:3/16 in; Mounting Flange:20; Cover End Pressure [Max:2 gpm @ 1200 rpm; Shaft Length:0.75 in; GPM @ 1,800 rpm, Cover End:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| Replacement Shimadzu SGP1 Forklift Parts Hydraulic Pump | Manufacturer Part No.:15.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Weight:Right Hand (CW); Shaft Key:SAE-16; Port Orientation - Shaft End:SAE; Port Orientation - Cover End:3/16 in; Minor Diameter:20; Shaft End Pressure [Max:2 gpm @ 1200 rpm; Pump Series:0.75 in; Integral Valve Configuration:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| CBTL CBT Series Hydraulic Double Gear Pump | Rotation:15.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Port Orientation - Shaft End:Right Hand (CW); GPM @ 1,800 rpm, Shaft End:SAE-16; Shaft End RPM [Max:SAE; Pressure Port Size, Cover End:3/16 in; Mounting Flange:20; Port Orientation - Cover End:2 gpm @ 1200 rpm; Shaft Length:0.75 in; Shaft Key:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| SQP21/SQP31/SQP32/SQP41/SQP42/43 Hydraulic Vane Type SQP Series Double pump | Shaft Key:15.0 LB; Integral Valve Configuration:Flange Mount; Relief Valve Setting:Right Hand (CW); Seal Material:SAE-16; Minor Diameter:SAE; Port Orientation - Cover End:3/16 in; Pump Series:20; Port Type:2 gpm @ 1200 rpm; Spline Description:0.75 in; Major Diameter [Max:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| GHP1;GHP1A;GHP1A2 High Pressure Mini Hydraulic Gear Pump | Max. RPM [Max:15.0 LB; Port Orientation - Cover End:Flange Mount; Shaft Length:Right Hand (CW); Displacement Cover End (cu in/revolution):SAE-16; Port Type:SAE; Pump Series:3/16 in; Integral Valve Configuration:20; Mounting Flange:2 gpm @ 1200 rpm; Shaft Type:0.75 in; Pilot Type:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| BMP315/OBP315 High Speed Orbit Hydraulic Motor For Drilling Machine | Spline Description:15.0 LB; Seal Material:Flange Mount; Minor Diameter [Max:Right Hand (CW); Shaft Key:SAE-16; Minor Diameter [Min:SAE; Major Diameter [Max:3/16 in; Shaft Seal Type:20; Shaft Dia.:2 gpm @ 1200 rpm; Shaft End Pressure [Max:0.75 in; Displacement Cover End (cu in/revolution):Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| China Eaton Char-lynn BMT/OMT 400CC Orbit Hydraulic Motor for Concrete Mixer | Displacement Shaft End (cu in/revolution):15.0 LB; Displacement Cover End (cu in/revolution):Flange Mount; Mounting Flange:Right Hand (CW); Seal Material:SAE-16; Minor Diameter [Max:SAE; Integral Valve Configuration:3/16 in; Cover End Flow @ RPM:20; GPM @ 1,800 rpm, Shaft End:2 gpm @ 1200 rpm; Port Size:0.75 in; Pressure Port Size, Shaft End:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| Replacement Poclain Hydraulic Motor Parts MS25 Cam Ring Stator | Cover End Flow @ RPM:15.0 LB; Shaft Dia.:Flange Mount; Minor Diameter [Max:Right Hand (CW); Cover End Pressure [Max:SAE-16; Displacement Shaft End (cu in/revolution):SAE; Major Diameter [Max:3/16 in; Minor Diameter:20; Shaft Seal Type:2 gpm @ 1200 rpm; Shaft Length:0.75 in; Weight:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
| for Daikin Hydraulic Piston Pump Spare Part V15 V18 V23 V38 V50 V70 | Shaft Dia.:15.0 LB; Model No.:Flange Mount; Cover End RPM [Max:Right Hand (CW); Minor Diameter [Min:SAE-16; Port Orientation - Cover End:SAE; Displacement Cover End (cu in/revolution):3/16 in; GPM @ 1,800 rpm, Cover End:20; Spline Description:2 gpm @ 1200 rpm; Pump Series:0.75 in; Controlled Flow Rate:Straight w/ Key; GPM @ Speed:3 gpm @ 1750 rpm; Pump Series:V10; Shaft Length:1 3/4 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:4500; Pressure [Max:2500 psi; GPM @ 1,800 rpm:3; Inlet Port Code:S; Mounting Flange:SAE A, 2 Bolt; Pressure Port Code:T; Mounting Flange Code:1; Outlet Port Position:90° CCW from Inlet; Displacement (in³/rev):0.4; Integral Valve Flow Rate:2 gal/min; Integral Valve Configuration:Flow Control & Relief; Integral Valve Relief Setting:1750 psi; Shaft Code + Outlet Port Code:1B; |
Vane Pumps - Pump School
As the rotor rotates (yellow arrow) and fluid enters the pump, centrifugal force, hydraulic pressure, and/or pushrods push the vanes to the walls of the housing. The
Vane Pumps | Oil Hydraulics | Daikin Industries, Ltd
DEV Series Medium-pressure Cartridge Type Vane Pump. DEV. Features. The intra-vane type structure that supports pressure up to 20.6 MPa realizes
Vane pump | mechanics | Britannica
A sliding vane pump is illustrated in Figure 3. The rotor is mounted off-centre. Rectangular vanes are positioned at regular intervals around the curved surface of
Rotary vane pump - Wikipedia
A rotary vane pump is a positive-displacement pump that consists of vanes mounted to a rotor that rotates inside a cavity. In some cases these vanes can have variable length and/or be tensioned to maintain contact with the walls as the pump rotates. It was invented by Charles C
Vane Pump - Becker Pumps
A rotary vane pump works using positive displacement. It is made up of a series of vanes mounted within a rotor. This provides circulation within the main cavity,
Vane Pumps | Parker NA
Parker's comprehensive line includes gear pumps, piston and vane pumps, gold cup hydrostatic transmission pumps and flow dividers and intensifiers
1080502 Rotor and Ring Kit for Hydraulic Triple Pump Rear Part Video