HLCB 10MPa Fixed Flow Hydraulic Gear Pump with Relief Valve
| Shaft Length: |
101.0 LB |
| Integral Valve Configuration: |
Flange Mount |
| Minor Diameter [Min: |
Left Hand (CCW) |
| Weight: |
4525VQ60A14-11AA20-LH |
| Seal Material: |
3 1/2 |
| Port Orientation - Cover End: |
Flange |
| Pilot Type: |
N/A |
| Mounting Flange: |
Standard Pilot |
| PDF |
|
Product Details
| Shaft Length |
101.0 LB |
| Integral Valve Configuration |
Flange Mount |
| Minor Diameter [Min |
Left Hand (CCW) |
| Weight |
4525VQ60A14-11AA20-LH |
| Seal Material |
3 1/2 |
| Port Orientation - Cover End |
Flange |
| Pilot Type |
N/A |
| Mounting Flange |
Standard Pilot |
| Shaft End RPM [Max |
1.25 in |
| Model No. |
14 Tooth Splined |
| Major Diameter [Max |
4525VQ |
| Spline Description |
1 15/16 in |
| Shaft End Flow @ RPM |
Buna-N |
| Rotation |
2200 |
| GPM @ 1,800 rpm, Shaft End |
1.04 in |
| Pressure Port Size, Shaft End |
SAE C, 2 Bolt |
| Controlled Flow Rate |
Single Shaft Seal |
| Minor Diameter [Max |
12/24 |
| Cover End RPM [Max |
2200 |
| Manufacturer Part No. |
2200 |
| Port Orientation - Shaft End |
N/A |
| Shaft Seal Type |
14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
| Cover End Pressure [Max |
1.248 in |
| Major Diameter [Min |
1.247 in |
| Mounting |
N/A |
| Shaft Dia. |
N/A |
| Shaft Key |
N/A |
| Displacement Shaft End (cu in/revolution) |
60 gal/min @ 1200 rpm, 90 gal/min @ 1800 rpm |
| Relief Valve Setting |
4525VQ60A14-11AA20-LH |
| Pump Series |
3000 |
| Port Size |
2500 |
| Displacement Cover End (cu in/revolution) |
21 |
| GPM @ 1,800 rpm, Cover End |
90 |
| Shaft Type |
w/o Integral Valves |
| Port Type |
Outlet 135° CCW from Inlet |
| Pressure Port Size, Cover End |
Outlet Opposite Inlet |
| Cover End Flow @ RPM |
1 in Flange |
| Shaft End Pressure [Max |
1 1/2 in Flange |
| Minor Diameter |
2.77 |
| Max. RPM [Max |
11.8 |