Hydraulic Auto System Parts Power Steering Pump Spare Part V10F
GPM @ 1,800 rpm, Shaft End: | 76.0 LB |
Weight: | Flange Mount |
Shaft Type: | Left Hand (CCW) |
Spline Description: | 3525VQ38A21-11AA20-LH |
Pressure Port Size, Shaft End: | 3 |
Rotation: | Flange |
Seal Material: | N/A |
Shaft Dia.: | Standard Pilot |
PDF |
|
Product Details
GPM @ 1,800 rpm, Shaft End | 76.0 LB |
Weight | Flange Mount |
Shaft Type | Left Hand (CCW) |
Spline Description | 3525VQ38A21-11AA20-LH |
Pressure Port Size, Shaft End | 3 |
Rotation | Flange |
Seal Material | N/A |
Shaft Dia. | Standard Pilot |
Mounting Flange | 1.25 in |
Pump Series | 14 Tooth Splined |
Shaft Seal Type | 3525VQ |
Displacement Shaft End (cu in/revolution) | 7.4 |
Mounting | Double |
Minor Diameter | Buna-N |
Minor Diameter [Min | 2400 |
Shaft End RPM [Max | 1.04 in |
Manufacturer Part No. | SAE C, 2 Bolt |
Port Type | Single Shaft Seal |
Displacement Cover End (cu in/revolution) | 12/24 |
Port Orientation - Cover End | 2500 |
Pilot Type | 2400 |
Port Size | N/A |
GPM @ 1,800 rpm, Cover End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Length | 1.248 in |
Max. RPM [Max | 1.247 in |
Relief Valve Setting | N/A |
Cover End RPM [Max | N/A |
Pressure Port Size, Cover End | N/A |
Controlled Flow Rate | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Model No. | 3525VQ38A21-11AA20-LH |
Shaft End Flow @ RPM | 3000 |
Major Diameter [Max | 3000 |
Shaft End Pressure [Max | 31.5 |
Major Diameter [Min | 57 |
Minor Diameter [Max | w/o Integral Valves |
Cover End Flow @ RPM | Outlet 135° CCW from Inlet |
Cover End Pressure [Max | Outlet Opposite Inlet |
Shaft Key | 1 in Flange |
Port Orientation - Shaft End | 1 1/4 in Flange |
Integral Valve Configuration | 4.1 |