Excavator PC40 Hydraulic Oil Gear Pumps 705-41-01920
Integral Valve Configuration: | 45.0 LB |
Port Type: | Flange Mount |
Mounting: | Left Hand (CCW) |
Shaft Type: | 2520VQ21A8-1DD20-LH |
Pressure Port Size, Shaft End: | 2 1/2 |
Shaft End Flow @ RPM: | Flange |
Shaft Seal Type: | 3/16 in |
GPM @ 1,800 rpm, Shaft End: | Standard Pilot |
PDF |
|
Product Details
Integral Valve Configuration | 45.0 LB |
Port Type | Flange Mount |
Mounting | Left Hand (CCW) |
Shaft Type | 2520VQ21A8-1DD20-LH |
Pressure Port Size, Shaft End | 2 1/2 |
Shaft End Flow @ RPM | Flange |
Shaft Seal Type | 3/16 in |
GPM @ 1,800 rpm, Shaft End | Standard Pilot |
Controlled Flow Rate | 0.875 in |
Displacement Shaft End (cu in/revolution) | Straight w/ Key |
Displacement Cover End (cu in/revolution) | 2520VQ |
Manufacturer Part No. | 1 15/16 in |
Pump Series | Buna-N |
Cover End Pressure [Max | 2500 |
Minor Diameter [Max | N/A |
Cover End RPM [Max | SAE B, 2 Bolt |
Minor Diameter [Min | Single Shaft Seal |
Weight | N/A |
Spline Description | 2700 |
Cover End Flow @ RPM | 2500 |
Max. RPM [Max | N/A |
Major Diameter [Min | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Port Orientation - Shaft End | N/A |
Relief Valve Setting | N/A |
Rotation | N/A |
Seal Material | N/A |
Port Orientation - Cover End | N/A |
Major Diameter [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft End RPM [Max | 2520VQ21A8-1DD20-LH |
Minor Diameter | 3000 |
Shaft Dia. | 3000 |
Model No. | 12 |
Pressure Port Size, Cover End | 31.5 |
Shaft End Pressure [Max | w/o Integral Valves |
Port Size | Outlet 135° CW from Inlet |
Pilot Type | Outlet 90° CW from Inlet |
Shaft Length | 3/4 in Flange |
GPM @ 1,800 rpm, Cover End | 1 in Flange |
Shaft Key | 1.67 |
Mounting Flange | 4.12 |