New Aftermarket PC225-7 Diesel Injection Fuel Feed Pump
Shaft Type: | 75.0 LB |
Cover End RPM [Max: | Flange Mount |
Controlled Flow Rate: | Left Hand (CCW) |
Mounting Flange: | 3520VQ25A12-1AA20LH |
Displacement Cover End (cu in/revolution): | 3 |
Spline Description: | Flange |
Manufacturer Part No.: | 5/16 in |
Seal Material: | Standard Pilot |
PDF |
|
Product Details
Shaft Type | 75.0 LB |
Cover End RPM [Max | Flange Mount |
Controlled Flow Rate | Left Hand (CCW) |
Mounting Flange | 3520VQ25A12-1AA20LH |
Displacement Cover End (cu in/revolution) | 3 |
Spline Description | Flange |
Manufacturer Part No. | 5/16 in |
Seal Material | Standard Pilot |
Port Orientation - Shaft End | 1.25 in |
Shaft Dia. | Straight w/ Key |
Shaft End Pressure [Max | 3520VQ |
Port Size | 2 1/2 in |
Rotation | Buna-N |
Port Orientation - Cover End | 2500 |
Shaft End Flow @ RPM | N/A |
Minor Diameter | SAE C, 2 Bolt |
Minor Diameter [Min | Single Shaft Seal |
Minor Diameter [Max | N/A |
Cover End Pressure [Max | 2500 |
Port Type | 2500 |
Shaft Key | N/A |
Pilot Type | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Pressure Port Size, Shaft End | N/A |
Relief Valve Setting | N/A |
Pressure Port Size, Cover End | N/A |
Max. RPM [Max | N/A |
Shaft Length | N/A |
Cover End Flow @ RPM | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Pump Series | 3520VQ25A12-1AA20LH |
Major Diameter [Min | 2300 |
Shaft Seal Type | 3000 |
Major Diameter [Max | 18 |
Displacement Shaft End (cu in/revolution) | 37.5 |
GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
GPM @ 1,800 rpm, Cover End | Outlet 135° CCW from Inlet |
Shaft End RPM [Max | Outlet Opposite Inlet |
Integral Valve Configuration | 3/4 in Flange |
Mounting | 1 1/4 in Flange |
Model No. | 2.41 |
Weight | 4.98 |