Excavator PC300-5 Engine S6D108 Oil Pump Assembly 6221-51-1100
Major Diameter [Max: | 75.0 LB |
Major Diameter [Min: | Flange Mount |
Displacement Shaft End (cu in/revolution): | Right Hand (CW) |
Pressure Port Size, Cover End: | 3520VQ30A5-11DD20 |
Minor Diameter [Max: | 3 |
Shaft End Pressure [Max: | Flange |
Shaft End Flow @ RPM: | N/A |
Rotation: | Standard Pilot |
PDF |
|
Product Details
Major Diameter [Max | 75.0 LB |
Major Diameter [Min | Flange Mount |
Displacement Shaft End (cu in/revolution) | Right Hand (CW) |
Pressure Port Size, Cover End | 3520VQ30A5-11DD20 |
Minor Diameter [Max | 3 |
Shaft End Pressure [Max | Flange |
Shaft End Flow @ RPM | N/A |
Rotation | Standard Pilot |
Manufacturer Part No. | 1.25 in |
Shaft Length | 14 Tooth Splined |
Mounting Flange | 3520VQ |
Controlled Flow Rate | 1 15/16 in |
Cover End Pressure [Max | Buna-N |
Pressure Port Size, Shaft End | 2500 |
Minor Diameter [Min | 1.04 in |
Model No. | SAE C, 2 Bolt |
Relief Valve Setting | Single Shaft Seal |
Shaft End RPM [Max | 12/24 |
Port Orientation - Shaft End | 2500 |
Weight | 2500 |
Shaft Seal Type | N/A |
Pump Series | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Port Type | 1.248 in |
GPM @ 1,800 rpm, Shaft End | 1.247 in |
GPM @ 1,800 rpm, Cover End | N/A |
Port Size | N/A |
Pilot Type | N/A |
Shaft Key | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Shaft Type | 3520VQ30A5-11DD20 |
Max. RPM [Max | 3000 |
Integral Valve Configuration | 3000 |
Shaft Dia. | 7.5 |
Mounting | 45 |
Cover End Flow @ RPM | w/o Integral Valves |
Spline Description | Outlet 135° CW from Inlet |
Cover End RPM [Max | Outlet 90° CW from Inlet |
Port Orientation - Cover End | 3/4 in Flange |
Minor Diameter | 1 1/4 in Flange |
Seal Material | 1.1 |
Displacement Cover End (cu in/revolution) | 5.96 |