Replace Sauer PV112 Piston Motor for Excavator Concrete Mixer
Minor Diameter: | 30.0 LB |
Model No.: | Flange Mount |
Pressure Port Size, Shaft End: | Right Hand (CW) |
Minor Diameter [Max: | V2010-1F9S4S-11DD12 |
Shaft End Pressure [Max: | 1 1/2 |
Relief Valve Setting: | Flange |
GPM @ 1,800 rpm, Shaft End: | N/A |
Port Size: | N/A |
PDF |
|
Product Details
Minor Diameter | 30.0 LB |
Model No. | Flange Mount |
Pressure Port Size, Shaft End | Right Hand (CW) |
Minor Diameter [Max | V2010-1F9S4S-11DD12 |
Shaft End Pressure [Max | 1 1/2 |
Relief Valve Setting | Flange |
GPM @ 1,800 rpm, Shaft End | N/A |
Port Size | N/A |
Displacement Shaft End (cu in/revolution) | 0.875 in |
Shaft Dia. | 13 Tooth Splined |
Cover End Flow @ RPM | V2010 |
Rotation | 1 5/16 in |
Manufacturer Part No. | Buna-N |
Displacement Cover End (cu in/revolution) | 2800 |
Minor Diameter [Min | 0.728 in |
Port Orientation - Shaft End | SAE B, 2 Bolt |
Port Orientation - Cover End | Single Shaft Seal |
Weight | 16/32 |
Spline Description | 3000 |
Major Diameter [Min | 2800 |
Cover End RPM [Max | N/A |
Pump Series | 4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm |
Shaft Type | 0.873 in |
Cover End Pressure [Max | 0.872 in |
Shaft End RPM [Max | 0.7335 in |
Pilot Type | 0.7225 in |
Mounting | N/A |
Shaft Seal Type | 9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Major Diameter [Max | V2010-1F9S4S-11DD12 |
Mounting Flange | 2500 |
Seal Material | 2500 |
Shaft Key | 6 |
Pressure Port Size, Cover End | 13.5 |
Shaft End Flow @ RPM | N/A |
Integral Valve Configuration | Outlet 135° CW from Inlet |
Shaft Length | Outlet 90° CW from Inlet |
Controlled Flow Rate | 1/2 in SAE O-Ring |
GPM @ 1,800 rpm, Cover End | 3/4 in SAE O-Ring |
Max. RPM [Max | 0.8 |
Port Type | 1.81 |