6127-61-1008 Japan bulldozer D355C1 engine part SA6D155 water pump
GPM @ 1,800 rpm, Cover End: | 75.0 LB |
Integral Valve Configuration: | Flange Mount |
Pressure Port Size, Shaft End: | Left Hand (CCW) |
Cover End RPM [Max: | 3520V25A11-86CC22L |
Shaft End RPM [Max: | 3 |
Max. RPM [Max: | Flange |
Shaft Seal Type: | 5/16 in |
Mounting Flange: | Standard Pilot |
PDF |
|
Product Details
GPM @ 1,800 rpm, Cover End | 75.0 LB |
Integral Valve Configuration | Flange Mount |
Pressure Port Size, Shaft End | Left Hand (CCW) |
Cover End RPM [Max | 3520V25A11-86CC22L |
Shaft End RPM [Max | 3 |
Max. RPM [Max | Flange |
Shaft Seal Type | 5/16 in |
Mounting Flange | Standard Pilot |
Shaft End Pressure [Max | 1.375 in |
Major Diameter [Max | Straight w/ Key |
Manufacturer Part No. | 3520V |
Relief Valve Setting | 3 7/8 in |
Spline Description | Buna-N |
Shaft Length | 1800 |
Pressure Port Size, Cover End | N/A |
Controlled Flow Rate | SAE C, 2 Bolt |
Minor Diameter [Min | Single Shaft Seal |
Displacement Shaft End (cu in/revolution) | N/A |
Minor Diameter [Max | 1800 |
Cover End Pressure [Max | 1800 |
Pump Series | N/A |
Model No. | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Pilot Type | N/A |
Shaft End Flow @ RPM | N/A |
Rotation | N/A |
Mounting | N/A |
Cover End Flow @ RPM | N/A |
Port Orientation - Shaft End | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Port Size | 3520V25A11-86CC22L |
GPM @ 1,800 rpm, Shaft End | 3000 |
Minor Diameter | 2500 |
Shaft Type | 16.5 |
Port Type | 37.5 |
Port Orientation - Cover End | N/A |
Weight | Outlet 45° CW from Inlet |
Major Diameter [Min | Outlet Inline w/Inlet |
Shaft Dia. | 3/4 in Code 61 |
Seal Material | 1 1/4 in Code 61 |
Displacement Cover End (cu in/revolution) | 2.2 |
Shaft Key | 4.9 |