5I8628 Hydraulic motor hydraulic excavator valve plate
Weight: | 75.0 LB |
Mounting: | Flange Mount |
Shaft Key: | Right Hand (CW) |
Shaft End Pressure [Max: | 3520VQ30E11-11CC20 |
Major Diameter [Max: | 3 |
Major Diameter [Min: | Flange |
Pilot Type: | N/A |
Shaft Length: | Standard Pilot |
PDF |
|
Product Details
Weight | 75.0 LB |
Mounting | Flange Mount |
Shaft Key | Right Hand (CW) |
Shaft End Pressure [Max | 3520VQ30E11-11CC20 |
Major Diameter [Max | 3 |
Major Diameter [Min | Flange |
Pilot Type | N/A |
Shaft Length | Standard Pilot |
Model No. | 1.25 in |
Mounting Flange | 14 Tooth Splined |
Port Size | 3520VQ |
Relief Valve Setting | 1 15/16 in |
Shaft End Flow @ RPM | Buna-N |
Pump Series | 2500 |
Pressure Port Size, Shaft End | 1.04 in |
Cover End RPM [Max | SAE C, 2 Bolt |
Manufacturer Part No. | Single Shaft Seal |
Displacement Shaft End (cu in/revolution) | 12/24 |
Max. RPM [Max | 2500 |
Displacement Cover End (cu in/revolution) | 2500 |
Pressure Port Size, Cover End | N/A |
Shaft End RPM [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | 1.248 in |
Integral Valve Configuration | 1.247 in |
GPM @ 1,800 rpm, Cover End | N/A |
Minor Diameter [Max | N/A |
Port Orientation - Cover End | N/A |
Cover End Pressure [Max | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Seal Material | 3520VQ30E11-11CC20 |
Spline Description | 3000 |
Shaft Dia. | 3000 |
Port Orientation - Shaft End | 16.5 |
Minor Diameter [Min | 45 |
Port Type | w/o Integral Valves |
Controlled Flow Rate | Outlet 45° CW from Inlet |
Shaft Seal Type | Outlet Inline w/Inlet |
Rotation | 1 1/16 in SAE O-Ring |
Shaft Type | 1 1/4 in Flange |
Cover End Flow @ RPM | 2.22 |
Minor Diameter | 5.96 |