CAT 170-9918 Fan Motor 1709918 for Excavator 385
Shaft Dia.: | 45.0 LB |
Shaft Seal Type: | Flange Mount |
GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
Cover End RPM [Max: | 2520VQ14A5-1CC20 |
Minor Diameter [Max: | 2.5 |
Major Diameter [Max: | Flange |
Shaft Type: | 3/16 in |
Rotation: | Standard Pilot |
PDF |
|
Product Details
Shaft Dia. | 45.0 LB |
Shaft Seal Type | Flange Mount |
GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
Cover End RPM [Max | 2520VQ14A5-1CC20 |
Minor Diameter [Max | 2.5 |
Major Diameter [Max | Flange |
Shaft Type | 3/16 in |
Rotation | Standard Pilot |
Seal Material | 0.875 in |
Port Type | Straight w/ Key |
Shaft Key | 2520VQ |
Port Orientation - Cover End | 1.9375 in |
Pilot Type | Double |
GPM @ 1,800 rpm, Cover End | Buna-N |
Port Orientation - Shaft End | 2700 |
Major Diameter [Min | N/A |
Mounting Flange | SAE B, 2 Bolt |
Spline Description | Single Shaft Seal |
Cover End Flow @ RPM | N/A |
Displacement Shaft End (cu in/revolution) | 2.8 |
Minor Diameter [Min | 2700 |
Displacement Cover End (cu in/revolution) | N/A |
Pressure Port Size, Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Model No. | N/A |
Cover End Pressure [Max | N/A |
Integral Valve Configuration | N/A |
Shaft End Pressure [Max | N/A |
Pressure Port Size, Cover End | N/A |
Shaft End RPM [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Max. RPM [Max | 2520VQ14A5-1CC20 |
Minor Diameter | 3000 |
Mounting | 3000 |
Relief Valve Setting | 7.5 |
Shaft End Flow @ RPM | 21 |
Pump Series | w/o Integral Valves |
Port Size | Outlet 45° CW from Inlet |
Shaft Length | Outlet Inline w/Inlet |
Manufacturer Part No. | 3/4 in Flange |
Controlled Flow Rate | 1 in Flange |
Weight | 1.1 |