KP1405A-R dump truck lifting gear pumps PTO dump pump
Shaft Key: | 30.0 LB |
Major Diameter [Min: | Flange Mount |
Max. RPM [Max: | Left Hand (CCW) |
Cover End Pressure [Max: | V2010-1F12S3S-11CC12LH |
Port Orientation - Shaft End: | 1 1/2 |
Port Type: | Flange |
Pressure Port Size, Shaft End: | N/A |
Shaft End RPM [Max: | N/A |
PDF |
|
Product Details
Shaft Key | 30.0 LB |
Major Diameter [Min | Flange Mount |
Max. RPM [Max | Left Hand (CCW) |
Cover End Pressure [Max | V2010-1F12S3S-11CC12LH |
Port Orientation - Shaft End | 1 1/2 |
Port Type | Flange |
Pressure Port Size, Shaft End | N/A |
Shaft End RPM [Max | N/A |
Weight | 0.875 in |
Seal Material | 13 Tooth Splined |
Rotation | V2010 |
Shaft Seal Type | 1 5/16 in |
Cover End Flow @ RPM | Buna-N |
Shaft End Pressure [Max | 2400 |
Port Orientation - Cover End | 0.728 in |
Relief Valve Setting | SAE B, 2 Bolt |
Pump Series | Single Shaft Seal |
Mounting Flange | 16/32 |
Minor Diameter | 3000 |
Displacement Shaft End (cu in/revolution) | 2400 |
Model No. | N/A |
Minor Diameter [Max | 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Shaft End | 0.873 in |
Integral Valve Configuration | 0.872 in |
Displacement Cover End (cu in/revolution) | 0.7335 in |
Pilot Type | 0.7225 in |
Manufacturer Part No. | N/A |
Spline Description | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Shaft Length | V2010-1F12S3S-11CC12LH |
Shaft End Flow @ RPM | 2500 |
Cover End RPM [Max | 2200 |
Port Size | 4.5 |
Major Diameter [Max | 18 |
Shaft Type | N/A |
Shaft Dia. | Outlet 45° CW from Inlet |
Controlled Flow Rate | Outlet Inline w/Inlet |
Mounting | 1/2 in SAE O-Ring |
GPM @ 1,800 rpm, Cover End | 3/4 in SAE O-Ring |
Minor Diameter [Min | 0.6 |
Pressure Port Size, Cover End | 2.38 |