D65 D75 D80 D85 D95 Bulldozer Hydraulic Gear Pump 07433-71103
Pump Series: | 76.0 LB |
Port Orientation - Shaft End: | Flange Mount |
Minor Diameter [Max: | Right Hand (CW) |
Cover End Pressure [Max: | 3525V35A17-11CC22R |
Max. RPM [Max: | 3 |
Displacement Cover End (cu in/revolution): | Flange |
Spline Description: | N/A |
Major Diameter [Min: | Standard Pilot |
PDF |
|
Product Details
Pump Series | 76.0 LB |
Port Orientation - Shaft End | Flange Mount |
Minor Diameter [Max | Right Hand (CW) |
Cover End Pressure [Max | 3525V35A17-11CC22R |
Max. RPM [Max | 3 |
Displacement Cover End (cu in/revolution) | Flange |
Spline Description | N/A |
Major Diameter [Min | Standard Pilot |
GPM @ 1,800 rpm, Cover End | 1.375 in |
Seal Material | 14 Tooth Splined |
Minor Diameter [Min | 3525V |
Controlled Flow Rate | 2 5/16 in |
Shaft Key | Buna-N |
Port Type | 1800 |
Pressure Port Size, Shaft End | 1.055 in |
Major Diameter [Max | SAE C, 2 Bolt |
Pilot Type | Single Shaft Seal |
Mounting | 12/24 |
Integral Valve Configuration | 1800 |
Shaft Length | 1800 |
Manufacturer Part No. | N/A |
Shaft Type | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Shaft End RPM [Max | 1.25 in |
Weight | 1.247 in |
Displacement Shaft End (cu in/revolution) | 1.06 in |
Pressure Port Size, Cover End | 1.05 in |
Cover End Flow @ RPM | N/A |
Cover End RPM [Max | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Rotation | 3525V35A17-11CC22R |
Shaft Dia. | 2500 |
Shaft End Flow @ RPM | 2500 |
Mounting Flange | 25.5 |
Shaft Seal Type | 52.5 |
GPM @ 1,800 rpm, Shaft End | N/A |
Port Orientation - Cover End | Outlet 45° CW from Inlet |
Relief Valve Setting | Outlet Inline w/Inlet |
Port Size | 1 in Code 61 |
Model No. | 1 1/4 in Code 61 |
Shaft End Pressure [Max | 3.4 |
Minor Diameter | 6.8 |