D85A-21/D85P-21 Bulldozer Hydraulic Gear Pump 705-21-32051
Shaft Seal Type: | 76.0 LB |
Shaft Length: | Flange Mount |
Port Orientation - Shaft End: | Left Hand (CCW) |
Controlled Flow Rate: | 3525VQ25A14-1CC20LH |
Major Diameter [Max: | 3 |
Cover End Flow @ RPM: | Flange |
Relief Valve Setting: | 5/16 in |
Model No.: | Standard Pilot |
PDF |
|
Product Details
Shaft Seal Type | 76.0 LB |
Shaft Length | Flange Mount |
Port Orientation - Shaft End | Left Hand (CCW) |
Controlled Flow Rate | 3525VQ25A14-1CC20LH |
Major Diameter [Max | 3 |
Cover End Flow @ RPM | Flange |
Relief Valve Setting | 5/16 in |
Model No. | Standard Pilot |
Pressure Port Size, Shaft End | 1.25 in |
Pilot Type | Straight w/ Key |
Shaft End Pressure [Max | 3525VQ |
GPM @ 1,800 rpm, Shaft End | 2.5 in |
Rotation | Buna-N |
Minor Diameter [Min | 2500 |
Minor Diameter [Max | N/A |
Major Diameter [Min | SAE C, 2 Bolt |
Port Type | Single Shaft Seal |
Shaft Key | N/A |
Shaft Type | 2500 |
Pressure Port Size, Cover End | 2500 |
Spline Description | N/A |
Displacement Shaft End (cu in/revolution) | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Shaft End Flow @ RPM | N/A |
Shaft End RPM [Max | N/A |
Shaft Dia. | N/A |
GPM @ 1,800 rpm, Cover End | N/A |
Manufacturer Part No. | N/A |
Mounting | 25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Port Orientation - Cover End | 3525VQ25A14-1CC20LH |
Mounting Flange | 3000 |
Max. RPM [Max | 3000 |
Seal Material | 21 |
Port Size | 37.5 |
Pump Series | w/o Integral Valves |
Cover End RPM [Max | Outlet 45° CW from Inlet |
Displacement Cover End (cu in/revolution) | Outlet Inline w/Inlet |
Cover End Pressure [Max | 1 in Flange |
Minor Diameter | 1 1/4 in Flange |
Weight | 2.77 |
Integral Valve Configuration | 4.98 |