SH200-5 Excavator Engine 4HK1 Water Pump 8-98022822-1
Cover End Flow @ RPM: | 76.0 LB |
Mounting: | Flange Mount |
Shaft Dia.: | Right Hand (CW) |
Shaft Seal Type: | 3525VQ30A21-11BB20 |
Shaft Type: | 3 |
Integral Valve Configuration: | Flange |
Spline Description: | N/A |
Pressure Port Size, Shaft End: | Standard Pilot |
PDF |
|
Product Details
Cover End Flow @ RPM | 76.0 LB |
Mounting | Flange Mount |
Shaft Dia. | Right Hand (CW) |
Shaft Seal Type | 3525VQ30A21-11BB20 |
Shaft Type | 3 |
Integral Valve Configuration | Flange |
Spline Description | N/A |
Pressure Port Size, Shaft End | Standard Pilot |
GPM @ 1,800 rpm, Shaft End | 1.25 in |
Shaft End RPM [Max | 14 Tooth Splined |
Minor Diameter | 3525VQ |
Controlled Flow Rate | 1 15/16 in |
Seal Material | Buna-N |
Manufacturer Part No. | 2500 |
Cover End Pressure [Max | 1.04 in |
Shaft End Flow @ RPM | SAE C, 2 Bolt |
Shaft Length | Single Shaft Seal |
Minor Diameter [Max | 12/24 |
Mounting Flange | 2500 |
Rotation | 2500 |
Port Orientation - Cover End | N/A |
Minor Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End | 1.248 in |
Port Size | 1.247 in |
Relief Valve Setting | N/A |
Port Orientation - Shaft End | N/A |
Model No. | N/A |
Displacement Cover End (cu in/revolution) | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Major Diameter [Max | 3525VQ30A21-11BB20 |
Shaft End Pressure [Max | 3000 |
Pressure Port Size, Cover End | 3000 |
Pilot Type | 31.5 |
Cover End RPM [Max | 45 |
Port Type | w/o Integral Valves |
Weight | Outlet 45° CCW from Inlet |
Max. RPM [Max | Outlet 90° CCW from Inlet |
Shaft Key | 1 in Flange |
Pump Series | 1 1/4 in Flange |
Major Diameter [Min | 4.12 |
Displacement Shaft End (cu in/revolution) | 5.96 |