Charging Pump PC200-6 PC300-6 Excavator Pilot Pump
Relief Valve Setting: | 45.0 LB |
Mounting: | Flange Mount |
Shaft Key: | Right Hand (CW) |
Cover End Pressure [Max: | 2520VQ17A8-11DD20 |
Max. RPM [Max: | 2 1/2 |
Mounting Flange: | Flange |
Pilot Type: | N/A |
Minor Diameter [Max: | Standard Pilot |
PDF |
|
Product Details
Relief Valve Setting | 45.0 LB |
Mounting | Flange Mount |
Shaft Key | Right Hand (CW) |
Cover End Pressure [Max | 2520VQ17A8-11DD20 |
Max. RPM [Max | 2 1/2 |
Mounting Flange | Flange |
Pilot Type | N/A |
Minor Diameter [Max | Standard Pilot |
Seal Material | 0.875 in |
Shaft Type | 13 Tooth Splined |
Minor Diameter | 2520VQ |
Minor Diameter [Min | 1 3/8 in |
Cover End RPM [Max | Buna-N |
Shaft End RPM [Max | 2500 |
Pump Series | 0.715 in |
Shaft End Pressure [Max | SAE B, 2 Bolt |
Shaft End Flow @ RPM | Single Shaft Seal |
Displacement Shaft End (cu in/revolution) | 16/32 |
GPM @ 1,800 rpm, Shaft End | 2700 |
GPM @ 1,800 rpm, Cover End | 2500 |
Shaft Seal Type | N/A |
Rotation | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Manufacturer Part No. | 0.873 in |
Pressure Port Size, Shaft End | 0.872 in |
Spline Description | N/A |
Model No. | N/A |
Shaft Dia. | N/A |
Controlled Flow Rate | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Cover End Flow @ RPM | 2520VQ17A8-11DD20 |
Weight | 3000 |
Port Orientation - Cover End | 3000 |
Displacement Cover End (cu in/revolution) | 12 |
Port Orientation - Shaft End | 25.5 |
Port Type | w/o Integral Valves |
Major Diameter [Max | Outlet 135° CW from Inlet |
Integral Valve Configuration | Outlet 90° CW from Inlet |
Port Size | 3/4 in Flange |
Shaft Length | 1 in Flange |
Major Diameter [Min | 1.67 |
Pressure Port Size, Cover End | 3.37 |