Hydraulic Gear Pump 705-41-08070 for Excavator PC15-3/PC10-7/PC20-7
Minor Diameter [Max: | 45.0 LB |
Major Diameter [Min: | Flange Mount |
Shaft Dia.: | Left Hand (CCW) |
Shaft Length: | 2520VQ21A8-11BC20L |
Manufacturer Part No.: | 2.5 |
Controlled Flow Rate: | Flange |
Shaft End Pressure [Max: | N/A |
Port Orientation - Shaft End: | Standard Pilot |
PDF |
|
Product Details
Minor Diameter [Max | 45.0 LB |
Major Diameter [Min | Flange Mount |
Shaft Dia. | Left Hand (CCW) |
Shaft Length | 2520VQ21A8-11BC20L |
Manufacturer Part No. | 2.5 |
Controlled Flow Rate | Flange |
Shaft End Pressure [Max | N/A |
Port Orientation - Shaft End | Standard Pilot |
Pilot Type | 0.875 in |
Shaft End RPM [Max | 13 Tooth Splined |
Shaft Key | 2520VQ |
Rotation | 1 3/8 in |
Mounting | Double |
Relief Valve Setting | Buna-N |
Minor Diameter [Min | 2500 |
Spline Description | 0.715 in |
Pressure Port Size, Cover End | SAE B, 2 Bolt |
Pressure Port Size, Shaft End | Single Shaft Seal |
Minor Diameter | 16/32 |
Cover End Flow @ RPM | 2700 |
Port Orientation - Cover End | 2500 |
Max. RPM [Max | N/A |
Cover End RPM [Max | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Shaft Seal Type | 0.873 in |
Port Type | 0.872 in |
Pump Series | N/A |
Port Size | N/A |
Mounting Flange | N/A |
Seal Material | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Displacement Shaft End (cu in/revolution) | 4.1 |
Cover End Pressure [Max | 3000 |
GPM @ 1,800 rpm, Cover End | 3000 |
Shaft End Flow @ RPM | 12 |
Major Diameter [Max | 31.5 |
Shaft Type | w/o Integral Valves |
Weight | Outlet 45° CW from Inlet |
Displacement Cover End (cu in/revolution) | Outlet 90° CCW from Inlet |
Integral Valve Configuration | 3/4 in Flange |
GPM @ 1,800 rpm, Shaft End | 1 in Flange |
Model No. | 1.7 |