6150-51-1004 Oil Pump Assy for Engine S6D125 Lubrication System
GPM @ 1,800 rpm, Shaft End: | 75.0 LB |
Spline Description: | Flange Mount |
Minor Diameter [Min: | Left Hand (CCW) |
Shaft End Pressure [Max: | 42 gal/min @ 1200 rpm |
Cover End Pressure [Max: | 45VQ42A-1A20-LH |
Port Orientation - Shaft End: | 3 |
Minor Diameter [Max: | Flange |
Displacement Cover End (cu in/revolution): | 5/16 in |
PDF |
|
Product Details
GPM @ 1,800 rpm, Shaft End | 75.0 LB |
Spline Description | Flange Mount |
Minor Diameter [Min | Left Hand (CCW) |
Shaft End Pressure [Max | 42 gal/min @ 1200 rpm |
Cover End Pressure [Max | 45VQ42A-1A20-LH |
Port Orientation - Shaft End | 3 |
Minor Diameter [Max | Flange |
Displacement Cover End (cu in/revolution) | 5/16 in |
Shaft End Flow @ RPM | 20 |
Pressure Port Size, Shaft End | 42 gpm @ 1200 rpm |
Port Orientation - Cover End | 1 |
Model No. | 1.25 in |
GPM @ 1,800 rpm, Cover End | Straight w/ Key |
Pilot Type | 63 gpm @ 1800 rpm |
Mounting | 45VQ |
Cover End Flow @ RPM | 2.44 in |
Major Diameter [Max | None |
Max. RPM [Max | 1 1/2 in Flange |
Manufacturer Part No. | Buna-N |
Seal Material | 2200 |
Port Type | 2500 psi |
Weight | 63 |
Controlled Flow Rate | A |
Shaft Length | SAE C, 2 Bolt |
Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
Shaft Key | Opposite Inlet Port |
Integral Valve Configuration | 45VQ42A-1A20-LH |
Relief Valve Setting | 8.5 |
Minor Diameter | w/o Integral Valves |