CAT Engine Parts 3304 3306 Priming Oil Fuel Pump 9H2256 For caterpillar Excavator Spare Parts
Displacement Cover End (cu in/revolution): | 45.0 LB |
Port Orientation - Shaft End: | Flange Mount |
Model No.: | Right Hand (CW) |
Shaft End Pressure [Max: | 2520VQ21A5-1DD20 |
Mounting Flange: | 2.5 |
Major Diameter [Min: | Flange |
Shaft Type: | 3/16 in |
Pressure Port Size, Shaft End: | Standard Pilot |
PDF |
|
Product Details
Displacement Cover End (cu in/revolution) | 45.0 LB |
Port Orientation - Shaft End | Flange Mount |
Model No. | Right Hand (CW) |
Shaft End Pressure [Max | 2520VQ21A5-1DD20 |
Mounting Flange | 2.5 |
Major Diameter [Min | Flange |
Shaft Type | 3/16 in |
Pressure Port Size, Shaft End | Standard Pilot |
Shaft Seal Type | 0.875 in |
Minor Diameter | Straight w/ Key |
GPM @ 1,800 rpm, Cover End | 2520VQ |
Max. RPM [Max | 1 15/16 in |
Pilot Type | Double |
GPM @ 1,800 rpm, Shaft End | Buna-N |
Integral Valve Configuration | 2500 |
Port Orientation - Cover End | N/A |
Seal Material | SAE B, 2 Bolt |
Shaft End Flow @ RPM | Single Shaft Seal |
Shaft End RPM [Max | N/A |
Displacement Shaft End (cu in/revolution) | 4.1 |
Rotation | 2500 |
Pressure Port Size, Cover End | N/A |
Manufacturer Part No. | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Minor Diameter [Max | N/A |
Weight | N/A |
Mounting | N/A |
Major Diameter [Max | N/A |
Port Type | N/A |
Minor Diameter [Min | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Controlled Flow Rate | 2520VQ21A5-1DD20 |
Cover End Flow @ RPM | 3000 |
Shaft Key | 3000 |
Cover End RPM [Max | 7.5 |
Shaft Dia. | 31.5 |
Cover End Pressure [Max | w/o Integral Valves |
Port Size | Outlet 135° CW from Inlet |
Pump Series | Outlet 90° CW from Inlet |
Relief Valve Setting | 3/4 in Flange |
Spline Description | 1 in Flange |
Shaft Length | 1.1 |