D75A-1 D65S-6/7/8 D65A-6/8/11 Wheel Loader Hydraulic Gear Pump 07430-72203
Rotation: | 35.0 LB |
Pressure Port Size, Cover End: | Flange Mount |
Minor Diameter [Max: | Left Hand (CCW) |
Weight: | V2020-1F8S8S-11DD30L |
GPM @ 1,800 rpm, Shaft End: | 2 |
Shaft Dia.: | Flange |
Integral Valve Configuration: | N/A |
Major Diameter [Max: | N/A |
PDF |
|
Product Details
Rotation | 35.0 LB |
Pressure Port Size, Cover End | Flange Mount |
Minor Diameter [Max | Left Hand (CCW) |
Weight | V2020-1F8S8S-11DD30L |
GPM @ 1,800 rpm, Shaft End | 2 |
Shaft Dia. | Flange |
Integral Valve Configuration | N/A |
Major Diameter [Max | N/A |
Pump Series | 0.875 in |
Shaft End Flow @ RPM | 13 Tooth Splined |
Pilot Type | V2020 |
Major Diameter [Min | 1 5/16 in |
Spline Description | Double |
Shaft Length | Buna-N |
Seal Material | 2800 |
Displacement Cover End (cu in/revolution) | 0.728 in |
Port Size | SAE B, 2 Bolt |
Minor Diameter | Single Shaft Seal |
Port Orientation - Cover End | 16/32 |
Shaft End Pressure [Max | 2800 |
Displacement Shaft End (cu in/revolution) | 1.6 |
Mounting | N/A |
Port Orientation - Shaft End | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Max. RPM [Max | 0.873 in |
Port Type | 0.872 in |
Model No. | 0.734 in |
Shaft Type | 0.723 in |
Pressure Port Size, Shaft End | N/A |
Cover End Flow @ RPM | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Mounting Flange | V2020-1F8S8S-11DD30L |
Cover End Pressure [Max | 2500 |
GPM @ 1,800 rpm, Cover End | 2500 |
Shaft Seal Type | 12 |
Cover End RPM [Max | 12 |
Controlled Flow Rate | N/A |
Relief Valve Setting | Outlet 90° CW from Inlet |
Shaft End RPM [Max | Outlet 90° CW from Inlet |
Minor Diameter [Min | 3/4 in SAE O-Ring |
Shaft Key | 3/4 in SAE O-Ring |
Manufacturer Part No. | 1.6 |