T6D Parker Denison Hydraulic Pump For Replacement
Shaft Type: | 118.0 LB |
Mounting Flange: | Flange Mount |
Minor Diameter [Max: | Right Hand (CW) |
Manufacturer Part No.: | 4535VQ42A30-11AA20 |
Shaft Length: | 4 |
Controlled Flow Rate: | Flange |
Cover End Pressure [Max: | N/A |
Port Orientation - Cover End: | Standard Pilot |
PDF |
|
Product Details
Shaft Type | 118.0 LB |
Mounting Flange | Flange Mount |
Minor Diameter [Max | Right Hand (CW) |
Manufacturer Part No. | 4535VQ42A30-11AA20 |
Shaft Length | 4 |
Controlled Flow Rate | Flange |
Cover End Pressure [Max | N/A |
Port Orientation - Cover End | Standard Pilot |
Max. RPM [Max | 1.25 in |
Port Size | 14 Tooth Splined |
GPM @ 1,800 rpm, Cover End | 4535VQ |
Weight | 1 15/16 in |
Pressure Port Size, Cover End | Buna-N |
Shaft End RPM [Max | 2200 |
Major Diameter [Max | 1.04 in |
Cover End Flow @ RPM | SAE C, 2 Bolt |
Port Orientation - Shaft End | Single Shaft Seal |
Pilot Type | 12/24 |
Model No. | 2200 |
Shaft Dia. | 2200 |
Shaft End Flow @ RPM | N/A |
Displacement Shaft End (cu in/revolution) | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Port Type | 1.248 in |
Cover End RPM [Max | 1.247 in |
Rotation | N/A |
Integral Valve Configuration | N/A |
Relief Valve Setting | N/A |
Shaft End Pressure [Max | 42 gal/min @ 1200 rpm, 63 gal/min @ 1800 rpm |
Spline Description | 4535VQ42A30-11AA20 |
Minor Diameter | 3000 |
GPM @ 1,800 rpm, Shaft End | 2500 |
Pump Series | 45 |
Displacement Cover End (cu in/revolution) | 63 |
Pressure Port Size, Shaft End | w/o Integral Valves |
Mounting | Outlet Opposite Inlet |
Major Diameter [Min | Outlet Opposite Inlet |
Shaft Seal Type | 1 1/4 in Flange |
Shaft Key | 1 1/2 in Flange |
Seal Material | 5.96 |
Minor Diameter [Min | 8.46 |