CAT Genuine Original Engine Oil Filter 1R0734 For Caterpillar Excavator Engine Parts
Pressure Port Size, Cover End: | 30.0 LB |
Port Size: | Flange Mount |
Manufacturer Part No.: | Right Hand (CW) |
Weight: | V2010-1F6S3S-11AA12 |
Port Orientation - Shaft End: | 1 1/2 |
Major Diameter [Min: | Flange |
Shaft Length: | N/A |
Pilot Type: | N/A |
PDF |
|
Product Details
Pressure Port Size, Cover End | 30.0 LB |
Port Size | Flange Mount |
Manufacturer Part No. | Right Hand (CW) |
Weight | V2010-1F6S3S-11AA12 |
Port Orientation - Shaft End | 1 1/2 |
Major Diameter [Min | Flange |
Shaft Length | N/A |
Pilot Type | N/A |
Minor Diameter [Max | 0.875 in |
Shaft Dia. | 13 Tooth Splined |
Spline Description | V2010 |
Shaft End Flow @ RPM | 1 5/16 in |
Minor Diameter | Buna-N |
Cover End RPM [Max | 3000 |
Cover End Flow @ RPM | 0.728 in |
Shaft Type | SAE B, 2 Bolt |
GPM @ 1,800 rpm, Shaft End | Single Shaft Seal |
Shaft Key | 16/32 |
Shaft Seal Type | 3000 |
Shaft End Pressure [Max | 3000 |
Mounting | N/A |
Integral Valve Configuration | 3 gal/min @ 1200 rpm, 4.5 gal/min @ 1800 rpm |
Rotation | 0.873 in |
Major Diameter [Max | 0.872 in |
Max. RPM [Max | 0.7335 in |
Seal Material | 0.7225 in |
GPM @ 1,800 rpm, Cover End | N/A |
Controlled Flow Rate | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
Port Type | V2010-1F6S3S-11AA12 |
Model No. | 2500 |
Minor Diameter [Min | 2500 |
Shaft End RPM [Max | 4.5 |
Pump Series | 9 |
Pressure Port Size, Shaft End | N/A |
Cover End Pressure [Max | Outlet 135° CCW from Inlet |
Port Orientation - Cover End | Outlet Opposite Inlet |
Displacement Cover End (cu in/revolution) | 1/2 in SAE O-Ring |
Displacement Shaft End (cu in/revolution) | 3/4 in SAE O-Ring |
Relief Valve Setting | 0.6 |
Mounting Flange | 1.19 |