HGP-2A Replace Hydromax Extrusion Oil Gear Pump HGP2A
| Minor Diameter [Max: | 32.0 LB |
| Shaft End Pressure [Max: | Foot Mounted |
| Port Type: | Left Hand (CCW) |
| Weight: | 25VQ12AF-1A20-LH |
| Cover End Flow @ RPM: | 1 1/2 |
| Pressure Port Size, Cover End: | Flange |
| Integral Valve Configuration: | 3/16 in |
| Shaft Dia.: | 20 |
| PDF |
|
Product Details
| Minor Diameter [Max | 32.0 LB |
| Shaft End Pressure [Max | Foot Mounted |
| Port Type | Left Hand (CCW) |
| Weight | 25VQ12AF-1A20-LH |
| Cover End Flow @ RPM | 1 1/2 |
| Pressure Port Size, Cover End | Flange |
| Integral Valve Configuration | 3/16 in |
| Shaft Dia. | 20 |
| Controlled Flow Rate | 12 gpm @ 1200 rpm |
| Seal Material | 1 |
| Port Orientation - Cover End | 0.875 in |
| Mounting Flange | Straight w/ Key |
| Displacement Shaft End (cu in/revolution) | 18 / 1800 |
| Shaft Key | 25VQ |
| Cover End RPM [Max | 2.31 in |
| GPM @ 1,800 rpm, Cover End | F |
| Shaft Seal Type | 1 in Flange |
| GPM @ 1,800 rpm, Shaft End | Buna-N |
| Model No. | 2700 |
| Max. RPM [Max | 3000 psi |
| Pump Series | 18 |
| Mounting | A |
| Port Size | SAE B, 2 Bolt |
| Pressure Port Size, Shaft End | Single Shaft Seal |
| Major Diameter [Max | Opposite Inlet Port |
| Spline Description | 25VQ12AF-1A20-LH |
| Displacement Cover End (cu in/revolution) | 2.45 |
| Shaft Length | w/o Integral Valves |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump