Hydstar Hydraulic Pump Cartridge for Replacement Vickers
| Cover End Flow @ RPM: | 63.0 LB |
| Shaft End RPM [Max: | Flange Mount |
| Port Orientation - Cover End: | Left Hand (CCW) |
| Mounting Flange: | 35VTBS30A-2297DB22L |
| Weight: | 3 |
| Manufacturer Part No.: | Flange |
| Port Orientation - Shaft End: | N/A |
| Spline Description: | 22 |
| PDF |
|
Product Details
| Cover End Flow @ RPM | 63.0 LB |
| Shaft End RPM [Max | Flange Mount |
| Port Orientation - Cover End | Left Hand (CCW) |
| Mounting Flange | 35VTBS30A-2297DB22L |
| Weight | 3 |
| Manufacturer Part No. | Flange |
| Port Orientation - Shaft End | N/A |
| Spline Description | 22 |
| GPM @ 1,800 rpm, Cover End | 30 gpm @ 1200 rpm |
| Port Size | 1.25 in |
| Minor Diameter [Min | 14 Tooth Splined |
| Displacement Shaft End (cu in/revolution) | 45 gpm @ 1800 rpm |
| Shaft End Flow @ RPM | 35VT |
| Port Type | 1.83 in |
| Cover End RPM [Max | 1 1/4 in Flange |
| GPM @ 1,800 rpm, Shaft End | Buna-N |
| Minor Diameter | 1800 |
| Controlled Flow Rate | 2500 psi |
| Pilot Type | 45 |
| Max. RPM [Max | SAE C, 2 Bolt |
| Cover End Pressure [Max | Single Shaft Seal |
| Integral Valve Configuration | 90° CW from Inlet |
| Major Diameter [Max | 35VTBS30A-2297DB22L |
| Shaft Length | 5.91 |
| Rotation | SAE B, 2 Bolt |
| Pump Series | Rotated 90° w/Respect to Mounting Flange |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump