A4VG180 Hydraulic Tandem Charge Pump Assembly for Rexroth Piston Pump
| Port Orientation - Shaft End: | 32.0 LB |
| Displacement Cover End (cu in/revolution): | Flange Mount |
| Max. RPM [Max: | Right Hand (CW) |
| Weight: | 25VQ12A-11A20 |
| Port Type: | 1 1/2 |
| Pressure Port Size, Shaft End: | Flange |
| Cover End RPM [Max: | N/A |
| Minor Diameter [Min: | 20 |
| PDF |
|
Product Details
| Port Orientation - Shaft End | 32.0 LB |
| Displacement Cover End (cu in/revolution) | Flange Mount |
| Max. RPM [Max | Right Hand (CW) |
| Weight | 25VQ12A-11A20 |
| Port Type | 1 1/2 |
| Pressure Port Size, Shaft End | Flange |
| Cover End RPM [Max | N/A |
| Minor Diameter [Min | 20 |
| Shaft Length | 12 gpm @ 1200 rpm |
| Mounting Flange | 11 |
| Shaft Key | 0.875 in |
| Spline Description | 13 Tooth Splined |
| Shaft Dia. | 18 gpm @ 1800 rpm |
| Major Diameter [Max | 25VQ |
| Pump Series | 1 3/8 in |
| Shaft End Pressure [Max | None |
| Mounting | 1 in Flange |
| Shaft End Flow @ RPM | Buna-N |
| Integral Valve Configuration | 2700 |
| Minor Diameter [Max | 3000 psi |
| Relief Valve Setting | 18 |
| Shaft Type | A |
| Shaft Seal Type | SAE B, 2 Bolt |
| Minor Diameter | Single Shaft Seal |
| Model No. | Opposite Inlet Port |
| Cover End Flow @ RPM | 25VQ12A-11A20 |
| Port Size | 2.45 |
| Rotation | w/o Integral Valves |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump