hydraulic gear oil pump 705-56-34630 For Dump Truck HD465-7 HD605-7
Shaft End RPM [Max: | 95.0 LB |
Displacement Cover End (cu in/revolution): | Flange Mount |
GPM @ 1,800 rpm, Cover End: | Right Hand (CW) |
Spline Description: | 4520VQ50A11-1AA20 |
Port Orientation - Cover End: | 3.5 |
Port Type: | Flange |
Major Diameter [Max: | 5/16 in |
Port Size: | Standard Pilot |
PDF |
|
Product Details
Shaft End RPM [Max | 95.0 LB |
Displacement Cover End (cu in/revolution) | Flange Mount |
GPM @ 1,800 rpm, Cover End | Right Hand (CW) |
Spline Description | 4520VQ50A11-1AA20 |
Port Orientation - Cover End | 3.5 |
Port Type | Flange |
Major Diameter [Max | 5/16 in |
Port Size | Standard Pilot |
Pump Series | 1.25 in |
Minor Diameter | Straight w/ Key |
Cover End Pressure [Max | 4520VQ |
Minor Diameter [Max | 1 15/16 in |
Model No. | Double |
Pressure Port Size, Shaft End | Buna-N |
Port Orientation - Shaft End | 2200 |
Minor Diameter [Min | N/A |
Rotation | SAE C, 2 Bolt |
Manufacturer Part No. | Single Shaft Seal |
Shaft Seal Type | N/A |
Shaft End Pressure [Max | 2200 |
Major Diameter [Min | 2200 |
Cover End RPM [Max | N/A |
Shaft Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Shaft Key | N/A |
Pilot Type | N/A |
Weight | N/A |
GPM @ 1,800 rpm, Shaft End | N/A |
Relief Valve Setting | N/A |
Displacement Shaft End (cu in/revolution) | 9.9 |
Max. RPM [Max | 4520VQ50A11-1AA20 |
Mounting Flange | 3000 |
Shaft Length | 2500 |
Controlled Flow Rate | 16.5 |
Pressure Port Size, Cover End | 75 |
Mounting | w/o Integral Valves |
Integral Valve Configuration | Outlet 135° CCW from Inlet |
Shaft End Flow @ RPM | Outlet Opposite Inlet |
Shaft Dia. | 3/4 in Flange |
Cover End Flow @ RPM | 1 1/2 in Flange |
Seal Material | 2.2 |