Original Engine Part Filters GM32359 Fuel Filter for Kohler
| GPM @ 1,800 rpm, Cover End: | 5/16 in |
| Pressure Port Size, Shaft End: | N/A |
| Integral Valve Configuration: | Piston Pumps |
| Minor Diameter: | PVH |
| Max. RPM [Max: | 80.0 LB |
| Displacement Cover End (cu in/revolution): | Right Hand (CW) |
| Model No.: | Flange |
| Manufacturer Part No.: | Variable Displacement Open Circuit |
| PDF |
|
Product Details
| GPM @ 1,800 rpm, Cover End | 5/16 in |
| Pressure Port Size, Shaft End | N/A |
| Integral Valve Configuration | Piston Pumps |
| Minor Diameter | PVH |
| Max. RPM [Max | 80.0 LB |
| Displacement Cover End (cu in/revolution) | Right Hand (CW) |
| Model No. | Flange |
| Manufacturer Part No. | Variable Displacement Open Circuit |
| Weight | #8 3/4-16 UNF-2B SAE O-Ring Port - Bottom (Top Plugged) |
| Major Diameter [Min | 2 in 4-Bolt Flange/Code 61 |
| Rotation | 1.25 in |
| Pilot Type | Straight w/ Key |
| Port Type | 33 gpm @ 1800 rpm |
| Shaft Type | 1 in 4-Bolt Flange/Code 61 |
| Pressure Port Size, Cover End | Pressure Compensator |
| Pump Series | 1.89 in |
| Port Size | Side Port |
| Mounting Flange | Viton |
| Minor Diameter [Max | None |
| Port Orientation - Shaft End | 33 |
| Spline Description | SAE C, 4 Bolt |
| Shaft Length | 1 1/4 w/5/16 Key |
| Relief Valve Setting | No Auxiliary Mounting Features |
| GPM @ 1,800 rpm, Shaft End | 4.5 |
| Mounting | None |
| Controlled Flow Rate | None |
| Shaft End Flow @ RPM | 3625 |
| Shaft End RPM [Max | 3,568-3,684 psi |
| Cover End Flow @ RPM | Standard Displacement |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump