| Cover End RPM [Max | 76.0 LB |
| Max. RPM [Max | Flange Mount |
| Rotation | Right Hand (CW) |
| Manufacturer Part No. | 3525VQ35A21-11DD20 |
| Cover End Flow @ RPM | 3 |
| Minor Diameter | Flange |
| Shaft End Pressure [Max | N/A |
| Port Size | Standard Pilot |
| Relief Valve Setting | 1.25 in |
| Mounting Flange | 14 Tooth Splined |
| Minor Diameter [Min | 3525VQ |
| Controlled Flow Rate | 1.9375 in |
| Pressure Port Size, Cover End | Buna-N |
| Spline Description | 2400 |
| GPM @ 1,800 rpm, Shaft End | 1.04 in |
| Shaft Dia. | SAE C, 2 Bolt |
| Shaft Length | Single Shaft Seal |
| Displacement Cover End (cu in/revolution) | 12/24 |
| Shaft Key | 2500 |
| Major Diameter [Min | 2400 |
| Integral Valve Configuration | N/A |
| Seal Material | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Port Type | 1.248 in |
| Shaft Seal Type | 1.247 in |
| Major Diameter [Max | N/A |
| Port Orientation - Cover End | N/A |
| Pressure Port Size, Shaft End | N/A |
| Mounting | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 3525VQ35A21-11DD20 |
| Cover End Pressure [Max | 3000 |
| Port Orientation - Shaft End | 3000 |
| GPM @ 1,800 rpm, Cover End | 31.5 |
| Minor Diameter [Max | 52.5 |
| Pilot Type | w/o Integral Valves |
| Shaft End Flow @ RPM | Outlet 135° CW from Inlet |
| Weight | Outlet 90° CW from Inlet |
| Pump Series | 1 in Flange |
| Shaft End RPM [Max | 1 1/4 in Flange |
| Shaft Type | 4.12 |
| Model No. | 6.88 |
101-1026-009/101-1026 -AFT Hydraulic Orbit Motor Hidrolik BMPH80
Replace Poclain Torque Plunger Hydraulic Motor Rotor MSE05 for Concrete Mixer
Orbital Hydraulic Motor 103-1014-012/103-1014 bmrs250 Eaton Char-lynn hydraulikmotor
High Torque Low Speed 101-1024-009/101-1024 Hydraulic Motor BMPH400
Small Volume BMM32 Hydraulic Small Swing Motor For Roller
Excavator Hydraulic Gear Pump for 230 310 Pilot Pump