HGP33A/HGP-33A Hydraulic System Double Gear Pump HGP for Fishery Machinery
Shaft Dia.: | 45.0 LB |
Major Diameter [Min: | Flange Mount |
Displacement Cover End (cu in/revolution): | Right Hand (CW) |
Port Orientation - Cover End: | 2520VQ17A14-1AA20 |
Port Type: | 2.5 |
Shaft End Pressure [Max: | Flange |
Model No.: | 3/16 in |
Pump Series: | Standard Pilot |
PDF |
|
Product Details
Shaft Dia. | 45.0 LB |
Major Diameter [Min | Flange Mount |
Displacement Cover End (cu in/revolution) | Right Hand (CW) |
Port Orientation - Cover End | 2520VQ17A14-1AA20 |
Port Type | 2.5 |
Shaft End Pressure [Max | Flange |
Model No. | 3/16 in |
Pump Series | Standard Pilot |
Pressure Port Size, Shaft End | 0.875 in |
Integral Valve Configuration | Straight w/ Key |
Minor Diameter [Min | 2520VQ |
Major Diameter [Max | 1.9375 in |
Cover End RPM [Max | Double |
Shaft Seal Type | Buna-N |
Displacement Shaft End (cu in/revolution) | 3.4 |
Seal Material | N/A |
Minor Diameter | SAE B, 2 Bolt |
Cover End Pressure [Max | Single Shaft Seal |
Controlled Flow Rate | N/A |
GPM @ 1,800 rpm, Shaft End | 2700 |
Cover End Flow @ RPM | 2500 |
Weight | N/A |
Max. RPM [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Shaft Length | N/A |
GPM @ 1,800 rpm, Cover End | N/A |
Pressure Port Size, Cover End | N/A |
Port Size | N/A |
Spline Description | N/A |
Mounting Flange | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Minor Diameter [Max | 2520VQ17A14-1AA20 |
Mounting | 2000 |
Shaft End RPM [Max | 3000 |
Port Orientation - Shaft End | 21 |
Relief Valve Setting | 25.5 |
Shaft Type | w/o Integral Valves |
Manufacturer Part No. | Outlet 135° CCW from Inlet |
Shaft End Flow @ RPM | Outlet Opposite Inlet |
Rotation | 3/4 in Flange |
Shaft Key | 1 in Flange |
Pilot Type | 2.8 |