Hydraulic Gear Pump Tandem Pump 07400-40500 for Bulldozer D60
Port Size: | 35.0 LB |
Port Orientation - Shaft End: | Flange Mount |
Shaft Seal Type: | Right Hand (CW) |
Port Type: | V2020-1F11B11B-1AA30 |
Shaft Key: | 2 |
Weight: | Flange |
Mounting Flange: | 3/16 in |
Max. RPM [Max: | N/A |
PDF |
|
Product Details
Port Size | 35.0 LB |
Port Orientation - Shaft End | Flange Mount |
Shaft Seal Type | Right Hand (CW) |
Port Type | V2020-1F11B11B-1AA30 |
Shaft Key | 2 |
Weight | Flange |
Mounting Flange | 3/16 in |
Max. RPM [Max | N/A |
Shaft Type | 0.875 in |
Displacement Cover End (cu in/revolution) | Straight w/ Key |
Pilot Type | V2020 |
Mounting | 2.3125 in |
Pump Series | Buna-N |
GPM @ 1,800 rpm, Cover End | 2500 |
Major Diameter [Min | N/A |
Shaft Length | SAE B, 2 Bolt |
Integral Valve Configuration | Single Shaft Seal |
Cover End Pressure [Max | N/A |
Seal Material | 2500 |
Controlled Flow Rate | 2500 |
Spline Description | N/A |
Shaft End Pressure [Max | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Shaft Dia. | N/A |
Pressure Port Size, Cover End | N/A |
Minor Diameter [Min | N/A |
Relief Valve Setting | N/A |
Minor Diameter | N/A |
Shaft End Flow @ RPM | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Manufacturer Part No. | V2020-1F11B11B-1AA30 |
Model No. | 2500 |
Cover End Flow @ RPM | 2500 |
Cover End RPM [Max | 16.5 |
Rotation | 16.5 |
Minor Diameter [Max | N/A |
Displacement Shaft End (cu in/revolution) | Outlet Opposite Inlet |
Pressure Port Size, Shaft End | Outlet Opposite Inlet |
GPM @ 1,800 rpm, Shaft End | 3/4 in SAE O-Ring |
Major Diameter [Max | 3/4 in SAE O-Ring |
Shaft End RPM [Max | 2.22 |
Port Orientation - Cover End | 2.22 |