PC400-8 Excavator 6D125 diesel engine cooling water pump 6251-61-1102
Cover End RPM [Max: | 75.0 LB |
Displacement Cover End (cu in/revolution): | Flange Mount |
Minor Diameter: | Right Hand (CW) |
Major Diameter [Min: | 3520VQ30E11-11DD20 |
Controlled Flow Rate: | 3 |
Port Type: | Flange |
Max. RPM [Max: | N/A |
Minor Diameter [Max: | Standard Pilot |
PDF |
|
Product Details
Cover End RPM [Max | 75.0 LB |
Displacement Cover End (cu in/revolution) | Flange Mount |
Minor Diameter | Right Hand (CW) |
Major Diameter [Min | 3520VQ30E11-11DD20 |
Controlled Flow Rate | 3 |
Port Type | Flange |
Max. RPM [Max | N/A |
Minor Diameter [Max | Standard Pilot |
Spline Description | 1.25 in |
Manufacturer Part No. | 14 Tooth Splined |
Port Orientation - Shaft End | 3520VQ |
Port Orientation - Cover End | 1 15/16 in |
GPM @ 1,800 rpm, Shaft End | Double |
Integral Valve Configuration | Buna-N |
Rotation | 2500 |
Shaft Length | 1.04 in |
GPM @ 1,800 rpm, Cover End | SAE C, 2 Bolt |
Pressure Port Size, Shaft End | Single Shaft Seal |
Relief Valve Setting | 12/24 |
Cover End Flow @ RPM | 2500 |
Displacement Shaft End (cu in/revolution) | 6 |
Shaft Seal Type | N/A |
Shaft Type | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Mounting | 1.248 in |
Major Diameter [Max | 1.247 in |
Seal Material | N/A |
Minor Diameter [Min | N/A |
Shaft End Pressure [Max | N/A |
Model No. | 30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
Shaft End Flow @ RPM | 3520VQ30E11-11DD20 |
Shaft End RPM [Max | 3000 |
Mounting Flange | 3000 |
Shaft Key | 16.5 |
Shaft Dia. | 45 |
Port Size | w/o Integral Valves |
Pressure Port Size, Cover End | Outlet 135° CW from Inlet |
Weight | Outlet 90° CW from Inlet |
Cover End Pressure [Max | 1 1/16 in SAE O-Ring |
Pump Series | 1 1/4 in Flange |
Pilot Type | 2.2 |