6221-61-1101 Japan excavator PC300-5 engine part on SA6D108-1A water pump
Pressure Port Size, Cover End: | 30.0 LB |
Minor Diameter [Max: | Flange Mount |
GPM @ 1,800 rpm, Cover End: | Left Hand (CCW) |
GPM @ 1,800 rpm, Shaft End: | V2010-1F13S4S-1AA12-LH |
Shaft Type: | 1 1/2 |
Port Type: | Flange |
Spline Description: | 3/16 in |
Shaft End Flow @ RPM: | N/A |
PDF |
|
Product Details
Pressure Port Size, Cover End | 30.0 LB |
Minor Diameter [Max | Flange Mount |
GPM @ 1,800 rpm, Cover End | Left Hand (CCW) |
GPM @ 1,800 rpm, Shaft End | V2010-1F13S4S-1AA12-LH |
Shaft Type | 1 1/2 |
Port Type | Flange |
Spline Description | 3/16 in |
Shaft End Flow @ RPM | N/A |
Manufacturer Part No. | 0.875 in |
Shaft Length | Straight w/ Key |
Port Orientation - Cover End | V2010 |
Shaft Key | 2 5/16 in |
Controlled Flow Rate | Buna-N |
Major Diameter [Min | 2400 |
Pressure Port Size, Shaft End | N/A |
Shaft Seal Type | SAE B, 2 Bolt |
Displacement Cover End (cu in/revolution) | Single Shaft Seal |
Cover End Pressure [Max | N/A |
Mounting | 3000 |
Shaft End RPM [Max | 2400 |
Displacement Shaft End (cu in/revolution) | N/A |
Shaft End Pressure [Max | 4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm |
Cover End Flow @ RPM | N/A |
Pilot Type | N/A |
Weight | N/A |
Pump Series | N/A |
Port Orientation - Shaft End | N/A |
Port Size | 13 gal/min @ 1200 rpm, 19.5 gal/min @ 1800 rpm |
Minor Diameter [Min | V2010-1F13S4S-1AA12-LH |
Minor Diameter | 2500 |
Mounting Flange | 2200 |
Cover End RPM [Max | 6 |
Rotation | 19.5 |
Max. RPM [Max | N/A |
Shaft Dia. | Outlet 135° CCW from Inlet |
Model No. | Outlet Opposite Inlet |
Major Diameter [Max | 1/2 in SAE O-Ring |
Seal Material | 3/4 in SAE O-Ring |
Relief Valve Setting | 0.8 |
Integral Valve Configuration | 2.59 |