Bulldozer D275 Hydraulic Gear Oil Pump 705-52-30250 for Komatsu Parts
Spline Description: | 45.0 LB |
Rotation: | Flange Mount |
Seal Material: | Right Hand (CW) |
Major Diameter [Max: | 2520VQ17A5-1DC20 |
Relief Valve Setting: | 2 1/2 |
GPM @ 1,800 rpm, Shaft End: | Flange |
Shaft Seal Type: | 3/16 in |
Manufacturer Part No.: | Standard Pilot |
PDF |
|
Product Details
Spline Description | 45.0 LB |
Rotation | Flange Mount |
Seal Material | Right Hand (CW) |
Major Diameter [Max | 2520VQ17A5-1DC20 |
Relief Valve Setting | 2 1/2 |
GPM @ 1,800 rpm, Shaft End | Flange |
Shaft Seal Type | 3/16 in |
Manufacturer Part No. | Standard Pilot |
Shaft Dia. | 0.875 in |
Controlled Flow Rate | Straight w/ Key |
Pressure Port Size, Cover End | 2520VQ |
Cover End RPM [Max | 1.9375 in |
Pump Series | Buna-N |
Shaft Type | 2500 |
Shaft Key | N/A |
Shaft End Flow @ RPM | SAE B, 2 Bolt |
Displacement Shaft End (cu in/revolution) | Single Shaft Seal |
Port Orientation - Shaft End | N/A |
Mounting | 2700 |
Integral Valve Configuration | 2500 |
Cover End Flow @ RPM | N/A |
Port Size | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Major Diameter [Min | N/A |
Weight | N/A |
Shaft End RPM [Max | N/A |
Max. RPM [Max | N/A |
Model No. | N/A |
Cover End Pressure [Max | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
GPM @ 1,800 rpm, Cover End | 2520VQ17A5-1DC20 |
Minor Diameter | 3000 |
Port Orientation - Cover End | 3000 |
Pilot Type | 7.5 |
Displacement Cover End (cu in/revolution) | 25.5 |
Minor Diameter [Min | w/o Integral Valves |
Shaft End Pressure [Max | Outlet 45° CW from Inlet |
Shaft Length | Outlet 90° CW from Inlet |
Port Type | 3/4 in Flange |
Pressure Port Size, Shaft End | 1 in Flange |
Mounting Flange | 1.1 |
Minor Diameter [Max | 3.37 |