CAT Excavator 325C Hydraulic Gear Pump 200-3406 for Caterpillar
Minor Diameter [Max: | 76.0 LB |
Relief Valve Setting: | Flange Mount |
Shaft Key: | Left Hand (CCW) |
Minor Diameter: | 3525VQ38A21-11AA20-LH |
Controlled Flow Rate: | 3 |
Mounting Flange: | Flange |
Shaft Type: | N/A |
Pump Series: | Standard Pilot |
PDF |
|
Product Details
Minor Diameter [Max | 76.0 LB |
Relief Valve Setting | Flange Mount |
Shaft Key | Left Hand (CCW) |
Minor Diameter | 3525VQ38A21-11AA20-LH |
Controlled Flow Rate | 3 |
Mounting Flange | Flange |
Shaft Type | N/A |
Pump Series | Standard Pilot |
Major Diameter [Max | 1.25 in |
Shaft Dia. | 14 Tooth Splined |
Integral Valve Configuration | 3525VQ |
Port Size | 1.9375 in |
Minor Diameter [Min | Double |
Port Orientation - Cover End | Buna-N |
Shaft Length | 2400 |
Manufacturer Part No. | 1.04 in |
Model No. | SAE C, 2 Bolt |
Cover End Pressure [Max | Single Shaft Seal |
Mounting | 12/24 |
Port Orientation - Shaft End | 2500 |
Shaft Seal Type | 2400 |
Shaft End Pressure [Max | N/A |
GPM @ 1,800 rpm, Shaft End | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | 1.248 in |
GPM @ 1,800 rpm, Cover End | 1.247 in |
Displacement Cover End (cu in/revolution) | N/A |
Shaft End Flow @ RPM | N/A |
Cover End Flow @ RPM | N/A |
Displacement Shaft End (cu in/revolution) | 7.4 |
Major Diameter [Min | 3525VQ38A21-11AA20-LH |
Cover End RPM [Max | 3000 |
Pressure Port Size, Shaft End | 3000 |
Pilot Type | 31.5 |
Weight | 57 |
Shaft End RPM [Max | w/o Integral Valves |
Seal Material | Outlet 135° CCW from Inlet |
Rotation | Outlet Opposite Inlet |
Max. RPM [Max | 1 in Flange |
Spline Description | 1 1/4 in Flange |
Port Type | 4.1 |