Hydraulic Gear Charge Pump 90R055 90R075 90R100 90R130 90R180 90R250
Shaft End Pressure [Max: | 45.0 LB |
Shaft Length: | Flange Mount |
GPM @ 1,800 rpm, Cover End: | Left Hand (CCW) |
Model No.: | 2520VQ17A5-1AA20-LH |
Seal Material: | 2 1/2 |
Cover End RPM [Max: | Flange |
Pilot Type: | 3/16 in |
Rotation: | Standard Pilot |
PDF |
|
Product Details
Shaft End Pressure [Max | 45.0 LB |
Shaft Length | Flange Mount |
GPM @ 1,800 rpm, Cover End | Left Hand (CCW) |
Model No. | 2520VQ17A5-1AA20-LH |
Seal Material | 2 1/2 |
Cover End RPM [Max | Flange |
Pilot Type | 3/16 in |
Rotation | Standard Pilot |
Displacement Shaft End (cu in/revolution) | 0.875 in |
Integral Valve Configuration | Straight w/ Key |
Pressure Port Size, Cover End | 2520VQ |
Pump Series | 1 15/16 in |
Port Orientation - Cover End | Buna-N |
Shaft End Flow @ RPM | 2500 |
Max. RPM [Max | N/A |
Mounting | SAE B, 2 Bolt |
Cover End Flow @ RPM | Single Shaft Seal |
Relief Valve Setting | N/A |
Cover End Pressure [Max | 2700 |
Weight | 2500 |
Controlled Flow Rate | N/A |
GPM @ 1,800 rpm, Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Major Diameter [Max | N/A |
Shaft End RPM [Max | N/A |
Major Diameter [Min | N/A |
Shaft Seal Type | N/A |
Minor Diameter [Max | N/A |
Port Type | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Shaft Type | 2520VQ17A5-1AA20-LH |
Minor Diameter | 3000 |
Spline Description | 3000 |
Displacement Cover End (cu in/revolution) | 7.5 |
Port Orientation - Shaft End | 25.5 |
Shaft Dia. | w/o Integral Valves |
Minor Diameter [Min | Outlet 135° CCW from Inlet |
Manufacturer Part No. | Outlet Opposite Inlet |
Mounting Flange | 3/4 in Flange |
Port Size | 1 in Flange |
Pressure Port Size, Shaft End | 1.1 |
Shaft Key | 3.37 |