Replacement Japan excavator engine part on 4D95L water pump 6204-61-1102
| Major Diameter [Min: | 50.0 LB |
| GPM @ 1,800 rpm, Shaft End: | Flange Mount |
| Minor Diameter [Max: | Left Hand (CCW) |
| Pump Series: | 35VQ25A-11D20-LH |
| Pressure Port Size, Shaft End: | 2 |
| Relief Valve Setting: | Flange |
| Max. RPM [Max: | N/A |
| Displacement Cover End (cu in/revolution): | 20 |
| PDF |
|
Product Details
| Major Diameter [Min | 50.0 LB |
| GPM @ 1,800 rpm, Shaft End | Flange Mount |
| Minor Diameter [Max | Left Hand (CCW) |
| Pump Series | 35VQ25A-11D20-LH |
| Pressure Port Size, Shaft End | 2 |
| Relief Valve Setting | Flange |
| Max. RPM [Max | N/A |
| Displacement Cover End (cu in/revolution) | 20 |
| Cover End RPM [Max | 25 gpm @ 1200 rpm |
| Pilot Type | 11 |
| Mounting | 1.25 in |
| Seal Material | 14 Tooth Splined |
| Shaft End RPM [Max | 37.5 gpm @ 1800 rpm |
| Cover End Flow @ RPM | 35VQ |
| Major Diameter [Max | 1 15/16 in |
| Shaft Key | None |
| Pressure Port Size, Cover End | 1 1/4 in Flange |
| Shaft Seal Type | Buna-N |
| Minor Diameter [Min | 2500 |
| Port Size | 3000 psi |
| Shaft End Pressure [Max | 37 1/2 |
| Integral Valve Configuration | A |
| Manufacturer Part No. | SAE C, 2 Bolt |
| Shaft End Flow @ RPM | Single Shaft Seal |
| Port Orientation - Shaft End | 90° CW from Inlet |
| Shaft Length | 35VQ25A-11D20-LH |
| Displacement Shaft End (cu in/revolution) | 4.98 |
| Cover End Pressure [Max | w/o Integral Valves |
Poclain PL42 PL44 Piston Shoe Hydraulic Motor Spare Parts
MK11 Stator Cam Ring Hydraulics Motor Spare Parts For Poclain
103-1062-012 bmrs250 Orbit Hydraulic Motor
Price of Hydraulic Motor 101-1019-009/101-1019 BMPH100
BMPW/OMPW Mounting Flange Small Hydraulic Drive Wheel Orbital Motor
HLCB 10MPa Fixed Flow Hydraulic Gear Pump with Relief Valve