New Aftermarket Cat E320C Excavator 3306 Engine Oil Pump
Rotation: | 45.0 LB |
Pressure Port Size, Shaft End: | Flange Mount |
Displacement Cover End (cu in/revolution): | Right Hand (CW) |
Cover End RPM [Max: | 2520VQ14C14-11DD20 |
GPM @ 1,800 rpm, Shaft End: | 2 1/2 |
GPM @ 1,800 rpm, Cover End: | Flange |
Cover End Pressure [Max: | N/A |
Weight: | Standard Pilot |
PDF |
|
Product Details
Rotation | 45.0 LB |
Pressure Port Size, Shaft End | Flange Mount |
Displacement Cover End (cu in/revolution) | Right Hand (CW) |
Cover End RPM [Max | 2520VQ14C14-11DD20 |
GPM @ 1,800 rpm, Shaft End | 2 1/2 |
GPM @ 1,800 rpm, Cover End | Flange |
Cover End Pressure [Max | N/A |
Weight | Standard Pilot |
Shaft Key | 0.875 in |
Mounting | 13 Tooth Splined |
Pump Series | 2520VQ |
Seal Material | 1.375 in |
Shaft Length | Buna-N |
Port Type | 2700 |
Port Orientation - Cover End | 0.715 in |
Cover End Flow @ RPM | SAE B, 2 Bolt |
Minor Diameter [Min | Single Shaft Seal |
Shaft End RPM [Max | 16/32 |
Shaft End Pressure [Max | 2700 |
Relief Valve Setting | 2700 |
Controlled Flow Rate | N/A |
Port Size | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Port Orientation - Shaft End | 0.873 in |
Integral Valve Configuration | 0.872 in |
Displacement Shaft End (cu in/revolution) | N/A |
Shaft Type | N/A |
Shaft Seal Type | N/A |
Minor Diameter [Max | 14 gal/min @ 1200 rpm, 21 gal/min @ 1800 rpm |
Pilot Type | 2520VQ14C14-11DD20 |
Model No. | 2000 |
Shaft End Flow @ RPM | 3000 |
Shaft Dia. | 21 |
Minor Diameter | 21 |
Major Diameter [Max | w/o Integral Valves |
Spline Description | Outlet 135° CW from Inlet |
Mounting Flange | Outlet 90° CW from Inlet |
Major Diameter [Min | 1 1/16 in SAE O-Ring |
Manufacturer Part No. | 1 5/16 in SAE O-Ring |
Max. RPM [Max | 2.8 |
Pressure Port Size, Cover End | 2.77 |