Hydraulic Auto System Parts Power Steering Pump Spare Part V10F
GPM @ 1,800 rpm, Shaft End: |
76.0 LB |
Weight: |
Flange Mount |
Shaft Type: |
Left Hand (CCW) |
Spline Description: |
3525VQ38A21-11AA20-LH |
Pressure Port Size, Shaft End: |
3 |
Rotation: |
Flange |
Seal Material: |
N/A |
Shaft Dia.: |
Standard Pilot |
PDF |
|
Product Details
GPM @ 1,800 rpm, Shaft End |
76.0 LB |
Weight |
Flange Mount |
Shaft Type |
Left Hand (CCW) |
Spline Description |
3525VQ38A21-11AA20-LH |
Pressure Port Size, Shaft End |
3 |
Rotation |
Flange |
Seal Material |
N/A |
Shaft Dia. |
Standard Pilot |
Mounting Flange |
1.25 in |
Pump Series |
14 Tooth Splined |
Shaft Seal Type |
3525VQ |
Displacement Shaft End (cu in/revolution) |
7.4 |
Mounting |
Double |
Minor Diameter |
Buna-N |
Minor Diameter [Min |
2400 |
Shaft End RPM [Max |
1.04 in |
Manufacturer Part No. |
SAE C, 2 Bolt |
Port Type |
Single Shaft Seal |
Displacement Cover End (cu in/revolution) |
12/24 |
Port Orientation - Cover End |
2500 |
Pilot Type |
2400 |
Port Size |
N/A |
GPM @ 1,800 rpm, Cover End |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Shaft Length |
1.248 in |
Max. RPM [Max |
1.247 in |
Relief Valve Setting |
N/A |
Cover End RPM [Max |
N/A |
Pressure Port Size, Cover End |
N/A |
Controlled Flow Rate |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
Model No. |
3525VQ38A21-11AA20-LH |
Shaft End Flow @ RPM |
3000 |
Major Diameter [Max |
3000 |
Shaft End Pressure [Max |
31.5 |
Major Diameter [Min |
57 |
Minor Diameter [Max |
w/o Integral Valves |
Cover End Flow @ RPM |
Outlet 135° CCW from Inlet |
Cover End Pressure [Max |
Outlet Opposite Inlet |
Shaft Key |
1 in Flange |
Port Orientation - Shaft End |
1 1/4 in Flange |
Integral Valve Configuration |
4.1 |