New Aftermarket PC225-7 Diesel Injection Fuel Feed Pump
Shaft Type: |
75.0 LB |
Cover End RPM [Max: |
Flange Mount |
Controlled Flow Rate: |
Left Hand (CCW) |
Mounting Flange: |
3520VQ25A12-1AA20LH |
Displacement Cover End (cu in/revolution): |
3 |
Spline Description: |
Flange |
Manufacturer Part No.: |
5/16 in |
Seal Material: |
Standard Pilot |
PDF |
|
Product Details
Shaft Type |
75.0 LB |
Cover End RPM [Max |
Flange Mount |
Controlled Flow Rate |
Left Hand (CCW) |
Mounting Flange |
3520VQ25A12-1AA20LH |
Displacement Cover End (cu in/revolution) |
3 |
Spline Description |
Flange |
Manufacturer Part No. |
5/16 in |
Seal Material |
Standard Pilot |
Port Orientation - Shaft End |
1.25 in |
Shaft Dia. |
Straight w/ Key |
Shaft End Pressure [Max |
3520VQ |
Port Size |
2 1/2 in |
Rotation |
Buna-N |
Port Orientation - Cover End |
2500 |
Shaft End Flow @ RPM |
N/A |
Minor Diameter |
SAE C, 2 Bolt |
Minor Diameter [Min |
Single Shaft Seal |
Minor Diameter [Max |
N/A |
Cover End Pressure [Max |
2500 |
Port Type |
2500 |
Shaft Key |
N/A |
Pilot Type |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
Pressure Port Size, Shaft End |
N/A |
Relief Valve Setting |
N/A |
Pressure Port Size, Cover End |
N/A |
Max. RPM [Max |
N/A |
Shaft Length |
N/A |
Cover End Flow @ RPM |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Pump Series |
3520VQ25A12-1AA20LH |
Major Diameter [Min |
2300 |
Shaft Seal Type |
3000 |
Major Diameter [Max |
18 |
Displacement Shaft End (cu in/revolution) |
37.5 |
GPM @ 1,800 rpm, Shaft End |
w/o Integral Valves |
GPM @ 1,800 rpm, Cover End |
Outlet 135° CCW from Inlet |
Shaft End RPM [Max |
Outlet Opposite Inlet |
Integral Valve Configuration |
3/4 in Flange |
Mounting |
1 1/4 in Flange |
Model No. |
2.41 |
Weight |
4.98 |