Replace Sauer PV112 Piston Motor for Excavator Concrete Mixer
Minor Diameter: |
30.0 LB |
Model No.: |
Flange Mount |
Pressure Port Size, Shaft End: |
Right Hand (CW) |
Minor Diameter [Max: |
V2010-1F9S4S-11DD12 |
Shaft End Pressure [Max: |
1 1/2 |
Relief Valve Setting: |
Flange |
GPM @ 1,800 rpm, Shaft End: |
N/A |
Port Size: |
N/A |
PDF |
|
Product Details
Minor Diameter |
30.0 LB |
Model No. |
Flange Mount |
Pressure Port Size, Shaft End |
Right Hand (CW) |
Minor Diameter [Max |
V2010-1F9S4S-11DD12 |
Shaft End Pressure [Max |
1 1/2 |
Relief Valve Setting |
Flange |
GPM @ 1,800 rpm, Shaft End |
N/A |
Port Size |
N/A |
Displacement Shaft End (cu in/revolution) |
0.875 in |
Shaft Dia. |
13 Tooth Splined |
Cover End Flow @ RPM |
V2010 |
Rotation |
1 5/16 in |
Manufacturer Part No. |
Buna-N |
Displacement Cover End (cu in/revolution) |
2800 |
Minor Diameter [Min |
0.728 in |
Port Orientation - Shaft End |
SAE B, 2 Bolt |
Port Orientation - Cover End |
Single Shaft Seal |
Weight |
16/32 |
Spline Description |
3000 |
Major Diameter [Min |
2800 |
Cover End RPM [Max |
N/A |
Pump Series |
4 gal/min @ 1200 rpm, 6 gal/min @ 1800 rpm |
Shaft Type |
0.873 in |
Cover End Pressure [Max |
0.872 in |
Shaft End RPM [Max |
0.7335 in |
Pilot Type |
0.7225 in |
Mounting |
N/A |
Shaft Seal Type |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
Major Diameter [Max |
V2010-1F9S4S-11DD12 |
Mounting Flange |
2500 |
Seal Material |
2500 |
Shaft Key |
6 |
Pressure Port Size, Cover End |
13.5 |
Shaft End Flow @ RPM |
N/A |
Integral Valve Configuration |
Outlet 135° CW from Inlet |
Shaft Length |
Outlet 90° CW from Inlet |
Controlled Flow Rate |
1/2 in SAE O-Ring |
GPM @ 1,800 rpm, Cover End |
3/4 in SAE O-Ring |
Max. RPM [Max |
0.8 |
Port Type |
1.81 |