6127-61-1008 Japan bulldozer D355C1 engine part SA6D155 water pump
GPM @ 1,800 rpm, Cover End: |
75.0 LB |
Integral Valve Configuration: |
Flange Mount |
Pressure Port Size, Shaft End: |
Left Hand (CCW) |
Cover End RPM [Max: |
3520V25A11-86CC22L |
Shaft End RPM [Max: |
3 |
Max. RPM [Max: |
Flange |
Shaft Seal Type: |
5/16 in |
Mounting Flange: |
Standard Pilot |
PDF |
|
Product Details
GPM @ 1,800 rpm, Cover End |
75.0 LB |
Integral Valve Configuration |
Flange Mount |
Pressure Port Size, Shaft End |
Left Hand (CCW) |
Cover End RPM [Max |
3520V25A11-86CC22L |
Shaft End RPM [Max |
3 |
Max. RPM [Max |
Flange |
Shaft Seal Type |
5/16 in |
Mounting Flange |
Standard Pilot |
Shaft End Pressure [Max |
1.375 in |
Major Diameter [Max |
Straight w/ Key |
Manufacturer Part No. |
3520V |
Relief Valve Setting |
3 7/8 in |
Spline Description |
Buna-N |
Shaft Length |
1800 |
Pressure Port Size, Cover End |
N/A |
Controlled Flow Rate |
SAE C, 2 Bolt |
Minor Diameter [Min |
Single Shaft Seal |
Displacement Shaft End (cu in/revolution) |
N/A |
Minor Diameter [Max |
1800 |
Cover End Pressure [Max |
1800 |
Pump Series |
N/A |
Model No. |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
Pilot Type |
N/A |
Shaft End Flow @ RPM |
N/A |
Rotation |
N/A |
Mounting |
N/A |
Cover End Flow @ RPM |
N/A |
Port Orientation - Shaft End |
25 gal/min @ 1200 rpm, 37.5 gal/min @ 1800 rpm |
Port Size |
3520V25A11-86CC22L |
GPM @ 1,800 rpm, Shaft End |
3000 |
Minor Diameter |
2500 |
Shaft Type |
16.5 |
Port Type |
37.5 |
Port Orientation - Cover End |
N/A |
Weight |
Outlet 45° CW from Inlet |
Major Diameter [Min |
Outlet Inline w/Inlet |
Shaft Dia. |
3/4 in Code 61 |
Seal Material |
1 1/4 in Code 61 |
Displacement Cover End (cu in/revolution) |
2.2 |
Shaft Key |
4.9 |