D65 D75 D80 D85 D95 Bulldozer Hydraulic Gear Pump 07433-71103
| Pump Series: |
76.0 LB |
| Port Orientation - Shaft End: |
Flange Mount |
| Minor Diameter [Max: |
Right Hand (CW) |
| Cover End Pressure [Max: |
3525V35A17-11CC22R |
| Max. RPM [Max: |
3 |
| Displacement Cover End (cu in/revolution): |
Flange |
| Spline Description: |
N/A |
| Major Diameter [Min: |
Standard Pilot |
| PDF |
|
Product Details
| Pump Series |
76.0 LB |
| Port Orientation - Shaft End |
Flange Mount |
| Minor Diameter [Max |
Right Hand (CW) |
| Cover End Pressure [Max |
3525V35A17-11CC22R |
| Max. RPM [Max |
3 |
| Displacement Cover End (cu in/revolution) |
Flange |
| Spline Description |
N/A |
| Major Diameter [Min |
Standard Pilot |
| GPM @ 1,800 rpm, Cover End |
1.375 in |
| Seal Material |
14 Tooth Splined |
| Minor Diameter [Min |
3525V |
| Controlled Flow Rate |
2 5/16 in |
| Shaft Key |
Buna-N |
| Port Type |
1800 |
| Pressure Port Size, Shaft End |
1.055 in |
| Major Diameter [Max |
SAE C, 2 Bolt |
| Pilot Type |
Single Shaft Seal |
| Mounting |
12/24 |
| Integral Valve Configuration |
1800 |
| Shaft Length |
1800 |
| Manufacturer Part No. |
N/A |
| Shaft Type |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Shaft End RPM [Max |
1.25 in |
| Weight |
1.247 in |
| Displacement Shaft End (cu in/revolution) |
1.06 in |
| Pressure Port Size, Cover End |
1.05 in |
| Cover End Flow @ RPM |
N/A |
| Cover End RPM [Max |
35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Rotation |
3525V35A17-11CC22R |
| Shaft Dia. |
2500 |
| Shaft End Flow @ RPM |
2500 |
| Mounting Flange |
25.5 |
| Shaft Seal Type |
52.5 |
| GPM @ 1,800 rpm, Shaft End |
N/A |
| Port Orientation - Cover End |
Outlet 45° CW from Inlet |
| Relief Valve Setting |
Outlet Inline w/Inlet |
| Port Size |
1 in Code 61 |
| Model No. |
1 1/4 in Code 61 |
| Shaft End Pressure [Max |
3.4 |
| Minor Diameter |
6.8 |