Charging Pump PC200-6 PC300-6 Excavator Pilot Pump
Relief Valve Setting: |
45.0 LB |
Mounting: |
Flange Mount |
Shaft Key: |
Right Hand (CW) |
Cover End Pressure [Max: |
2520VQ17A8-11DD20 |
Max. RPM [Max: |
2 1/2 |
Mounting Flange: |
Flange |
Pilot Type: |
N/A |
Minor Diameter [Max: |
Standard Pilot |
PDF |
|
Product Details
Relief Valve Setting |
45.0 LB |
Mounting |
Flange Mount |
Shaft Key |
Right Hand (CW) |
Cover End Pressure [Max |
2520VQ17A8-11DD20 |
Max. RPM [Max |
2 1/2 |
Mounting Flange |
Flange |
Pilot Type |
N/A |
Minor Diameter [Max |
Standard Pilot |
Seal Material |
0.875 in |
Shaft Type |
13 Tooth Splined |
Minor Diameter |
2520VQ |
Minor Diameter [Min |
1 3/8 in |
Cover End RPM [Max |
Buna-N |
Shaft End RPM [Max |
2500 |
Pump Series |
0.715 in |
Shaft End Pressure [Max |
SAE B, 2 Bolt |
Shaft End Flow @ RPM |
Single Shaft Seal |
Displacement Shaft End (cu in/revolution) |
16/32 |
GPM @ 1,800 rpm, Shaft End |
2700 |
GPM @ 1,800 rpm, Cover End |
2500 |
Shaft Seal Type |
N/A |
Rotation |
8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Manufacturer Part No. |
0.873 in |
Pressure Port Size, Shaft End |
0.872 in |
Spline Description |
N/A |
Model No. |
N/A |
Shaft Dia. |
N/A |
Controlled Flow Rate |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Cover End Flow @ RPM |
2520VQ17A8-11DD20 |
Weight |
3000 |
Port Orientation - Cover End |
3000 |
Displacement Cover End (cu in/revolution) |
12 |
Port Orientation - Shaft End |
25.5 |
Port Type |
w/o Integral Valves |
Major Diameter [Max |
Outlet 135° CW from Inlet |
Integral Valve Configuration |
Outlet 90° CW from Inlet |
Port Size |
3/4 in Flange |
Shaft Length |
1 in Flange |
Major Diameter [Min |
1.67 |
Pressure Port Size, Cover End |
3.37 |